Theses and Dissertations at Montana State University (MSU)
Permanent URI for this collectionhttps://scholarworks.montana.edu/handle/1/733
Browse
1 results
Search Results
Item Development of non-proprietary ultra high performance concrete(Montana State University - Bozeman, College of Engineering, 2017) Snidarich, Richard Allen, Jr.; Chairperson, Graduate Committee: Michael BerryUltra-high performance concrete (UHPC) has mechanical and durability properties that far exceed those of conventional concrete. Particularly, UHPC has compressive and post-cracking tensile strengths of around 20 ksi and 0.72 ksi, respectively. Thus, elements made with UHPC are thinner/lighter than elements made with conventional concrete. The enhanced durability properties of UHPC also allow for longer service lives and decreased maintenance costs. However, using UHPC in conventional concrete applications has been cost prohibitive, with commercially available/proprietary mixes costing over 10 times conventional concrete mixes. The overall objective of this research was to develop and characterize economical non-proprietary UHPC mixes made with materials readily available in Montana. This objective was achieved by first identifying and obtaining suitable/economical materials to be used in UHPC. Specifically, the materials identified and used in this research were simply Type I/II portland cement, class F fly ash, fine masonry sand, silica fume, and high range water reducer. UHPC mixes were then developed/characterized/optimized by using a statistical experimental design procedure (response surface methodology). The mixes developed as part of this research obtained compressive strengths of approximately 20 ksi with flows of 11 inches, and costs of $300 per cubic yard (excluding freight of materials).