Show simple item record

dc.contributor.advisorChairperson, Graduate Committee: James P. Becker.en
dc.contributor.authorDaggett, Josephine Anne.en
dc.date.accessioned2013-06-25T18:41:48Z
dc.date.available2013-06-25T18:41:48Z
dc.date.issued2009en
dc.identifier.urihttps://scholarworks.montana.edu/xmlui/handle/1/1134
dc.description.abstractCarbon nanotubes have become a very exciting area of research in the field of nanoelectronics in the past few years. Diodes and transistors fabricated using carbon nanotubes are theoretically very promising. Although, experimentally these devices are challenging to successfully realize it is hoped that further research and improvements in fabrication procedures will yield devices which could match or surpass current CMOS technologies. However, there are still many areas that need to be improved before anyone sees these devices mass produced commercially. This thesis gives a detailed overview of the fundamentals of these devices which can be easily understood by someone with a typical electrical engineering background. The purpose of this thesis is to investigate both the theory behind these devices and to conduct a series of simulations in order to determine how they compare to ultimately scaled CMOS for high frequency applications by ignoring the challenges associated with fabricating these devices reliably. In other words, at best how could these devices perform if they could be mass produced with high yield compared to current technologies? First an introduction to carbon nanotubes and a review of relevant concepts from solid-state electronics will be given, followed by a brief overview of quantum theory for 1-D systems as it pertains to nanotube based electronics. This will then be used to develop models for a Schottky diode and Schottky barrier transistor. Simulations using these models were conducted that show the potential for these devices for high frequency electronics. These results are subsequently used to compare to current state-of-the-art technologies. Upon completion of the simulations in this thesis, it was determined that carbon nanotube based Schottky diodes and Schottky barrier transistors do not perform as well as current technologies in relation to applications for submillimeter/millimeter wave detection and analog circuits, even when assuming no limitations imposed due to poor fabrication.en
dc.language.isoengen
dc.publisherMontana State University - Bozeman, College of Engineeringen
dc.subject.lcshCarbon.en
dc.subject.lcshNanotubes.en
dc.subject.lcshSubmillimeter waves.en
dc.titleTheoretical investigation of carbon nanotube devices for millimeter/submillimeter wave analog circuits
dc.typeThesis
dc.rights.holderCopyright Josephine Anne Daggett 2009en
thesis.catalog.ckey1509074en
thesis.degree.committeemembersMembers, Graduate Committee: Todd Kaiser; Yves U. Idzerdaen
thesis.degree.departmentElectrical & Computer Engineering.en
thesis.degree.genreThesisen
thesis.degree.nameMSen
thesis.format.extentfirstpage1en
thesis.format.extentlastpage98en
mus.identifier.categoryEngineering & Computer Science
mus.relation.departmentElectrical & Computer Engineering.en_US
mus.relation.universityMontana State University - Bozemanen_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record