Show simple item record

dc.contributor.advisorChairperson, Graduate Committee: M. Ruhul Aminen
dc.contributor.authorKizhakkeveedu Ramachandran, Santhoshen
dc.date.accessioned2013-06-25T18:42:12Z
dc.date.available2013-06-25T18:42:12Z
dc.date.issued2010en
dc.identifier.urihttps://scholarworks.montana.edu/xmlui/handle/1/1649en
dc.description.abstractNumerical investigation has been performed to study heat transfer and pressure drop characteristics of plain fin and wavy fin heat exchangers in the external airside. The characteristics were studied using the dimensional parameters, friction factor and Colburn factor. The flow rate was varied over the range of 2000 < or = Re < or = 7000 in the turbulent and transitional regimes. The analyses were performed using a finite volume method. Comparisons with experimental data were performed to validate the numerical results. The geometrical parameters like the fin pitch, transverse pitch, wavy angle and wavy height were varied to study the effects of each individual parameter. Comparisons were also drawn to the laminar range, the effect of number of tube rows and the pattern in which the tube were arranged. The investigation shows that the effect of the number of tube rows on heat transfer coefficient is less after the number of rows is increased beyond four. It is observed that the reducing the fin pitch increases the heat transfer and pressure drop in both the configurations. The increase in transverse pitch resulted in a decrease in thermal and hydraulic characteristics. Response to the variation of wavy angle and wavy height was similar, as the wavy angle and wavy height were increased, the number of corrugations also increased resulting in higher heat transfer and a higher pressure drop. The critical balance between high heat transfer and low pressure drop was analyzed using the efficiency index for each parameter variation. The tube layouts in the staggered form were observed to be better than the in-lined layout for both the configurations.en
dc.language.isoenen
dc.publisherMontana State University - Bozeman, College of Engineeringen
dc.subject.lcshSimulation methodsen
dc.subject.lcshFinite volume methoden
dc.subject.lcshHeat exchangersen
dc.subject.lcshTurbulenceen
dc.titleNumerical analysis of airside characteristics in plain and wavy heat exchangers in the turbulent flow regimeen
dc.typeThesisen
dc.rights.holderCopyright 2010 by Santhosh Kizhakkeveedu Ramachandranen
thesis.catalog.ckey1750958en
thesis.degree.committeemembersMembers, Graduate Committee: Alan George; Ahsan Mianen
thesis.degree.departmentMechanical & Industrial Engineering.en
thesis.degree.genreThesisen
thesis.degree.nameMSen
thesis.format.extentfirstpage1en
thesis.format.extentlastpage146en


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record


MSU uses DSpace software, copyright © 2002-2017  Duraspace. For library collections that are not accessible, we are committed to providing reasonable accommodations and timely access to users with disabilities. For assistance, please submit an accessibility request for library material.