Show simple item record

dc.contributor.advisorChairperson, Graduate Committee: Kevin S. Repaskyen
dc.contributor.authorColberg, Luke Stewarten
dc.description.abstractThis thesis describes the design, construction, and testing of a high spectral resolution lidar (HSRL) as a part of a combined HSRL and differential absorption lidar (DIAL) system. The combined HSRL and DIAL instrument is constructed using the MicroPulse DIAL (MPD) architecture and uses distributed Bragg reflector lasers. The MPD architecture is unique because it is eye-safe and cost-effective; therefore, it is ideal for creating a network of ground-based lidars. This instrument is designed for thermodynamic profiling of the lower troposphere. A network of these instruments would be helpful for wide-scale atmospheric monitoring for weather forecasting and climate science. The purpose of the HSRL is to retrieve the optical properties of aerosols in the lower troposphere. The HSRL uses the DIAL offline laser, which has a wavelength of 770.1085 nm, and a potassium vapor cell as the spectral filter. The data retrieved from the HSRL provides the aerosol backscatter coefficient and the backscatter ratio up to an altitude of 7 km during nighttime operation and 5 km during daytime operation. The time resolution for these measurements is 5 minutes, and the range resolution is 150 m. These aerosol optical properties are valuable for aerosol studies and climate modeling; aerosols introduce the most significant degree of uncertainty in modeling the heat flux of the atmosphere. Additionally, these aerosol optical properties can be used to find the planetary boundary layer height (PBLH). The planetary boundary layer controls the exchange of heat, water vapor, aerosols, and momentum between the surface and the atmosphere. It has been demonstrated that the PBLH strongly affects turbulent mixing, convective transport, and cloud entrainment, which makes the PBLH an important parameter for weather forecasting and climate modeling. Despite its significance in atmospheric science, there is no standard method for defining the PBLH. A retrieval method for finding the daytime PBLH using HSRL data is proposed, and data comparisons to radiosonde PBLH retrievals are provided. The algorithm shows a good agreement with the radiosonde retrievals for conditions with a well-behaved boundary layer.en
dc.publisherMontana State University - Bozeman, College of Engineeringen
dc.subject.lcshOptical radaren
dc.subject.lcshRemote sensingen
dc.titleDiode-laser-based high spectral resolution LIDARen
dc.rights.holderCopyright 2021 by Luke Stewart Colbergen, Graduate Committee: Wm. Randall Babbitt; Joseph A. Shaw; Wataru Nakagawaen & Computer Engineering.en

Files in this item


This item appears in the following Collection(s)

Show simple item record

MSU uses DSpace software, copyright © 2002-2017  Duraspace. For library collections that are not accessible, we are committed to providing reasonable accommodations and timely access to users with disabilities. For assistance, please submit an accessibility request for library material.