Show simple item record

dc.contributor.advisorChairperson, Graduate Committee: Max Deiberten
dc.contributor.authorPfluge, Matthew Edwarden
dc.date.accessioned2013-06-25T18:38:23Z
dc.date.available2013-06-25T18:38:23Z
dc.date.issued2005en
dc.identifier.urihttps://scholarworks.montana.edu/xmlui/handle/1/2052en
dc.description.abstractExtensive research has been performed on solid oxide fuel cell cathodes. These cathodes must be stable in the oxidation environment and have sufficient electrical conductivity and catalytic activity for the oxidant gas reaction at the appropriate operating temperature. Also, the cathode must be chemically and thermally compatible with the other cell components at room temperature, operating temperatures, and higher fabrication temperatures. Praseodymium strontium manganite (PSM) has shown promising electrical properties with respect to ideal properties of cathodes in solid oxide fuel cells. Various dopant levels of strontium in the perovskite structure were investigated, which include Pr1-xSrxMnO3-ä where x = 0.10, 0.20, 0.30 and (Pr1- xSrx)0.98MnO3-ä where x = 0.20 and 0.30. This cathodic material has shown electrical conductivity over twice as high as a traditionally used cathode, La0.8Sr0.2MnO3. Through this investigation, the electrical and ionic conductivities of this ceramic series were measured from 200oC to 950oC. Another important electrical measurement investigated was the Seebeck coefficient within the same temperature range. This coefficient is a measurement of the change in voltage across a temperature gradient and thus can be referred to as its thermal power. Conductor types have been interpolated from the measurements. This measurement provides an improved understanding of the high electrical properties displayed within the material. Cathodic overpotential was also measured using half cell reactions performed in the temperature range of 650oC to 850oC under both air and pure oxygen. This measurement was used to calculate the current exchange density of the cathode and the area specific resistance. Overall, as the strontium concentration increased, the electrical activity of the ceramic subsequently increased. Furthermore, in relation to the traditional cathode material, La0.8Sr0.2MnO3, the substitution of lanthanum with praseodymium has produced more effective cathodic performance.en
dc.language.isoenen
dc.publisherMontana State University - Bozeman, College of Engineeringen
dc.subject.lcshSolid oxide fuel cells.en
dc.subject.lcshPraseodymium.en
dc.subject.lcshStrantium.en
dc.subject.lcshManganite.en
dc.titleStudy of praseodymium strontium manganite for the potential use as a solid oxide fuel cell cathodeen
dc.typeThesisen
dc.rights.holderCopyright 2005 by Matthew Edward Pflugeen
thesis.catalog.ckey1168325en
thesis.degree.committeemembersMembers, Graduate Committee: Richard Smith; James Duffyen
thesis.degree.departmentChemical & Biological Engineering.en
thesis.degree.genreThesisen
thesis.degree.nameMSen
thesis.format.extentfirstpage1en
thesis.format.extentlastpage58en


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record