Show simple item record

dc.contributor.advisorChairperson, Graduate Committee: David A. Milleren
dc.contributor.authorStoffels, Mark Thomasen
dc.date.accessioned2013-09-12T14:01:44Z
dc.date.available2013-09-12T14:01:44Z
dc.date.issued2013en
dc.identifier.urihttps://scholarworks.montana.edu/xmlui/handle/1/2733en
dc.description.abstractMarine Hydrokinetic (MHK) Power involves using the power of moving water to create clean, renewable energy. The primary structure of MHK energy devices are most commonly constructed using epoxy glass composite materials. Unstressed epoxy glass composites absorb moisture when subjected to a humid environment; this moisture absorption leads to degradation of mechanical properties of the composite. This phenomenon is relatively well documented and understood. However, under most operating conditions the structure will be under some combination of externally applied stresses. The objective of this study is to characterize the effects of externally applied stresses on the moisture diffusion parameters of epoxy glass laminates, and how these changes ultimately influence mechanical properties. A model is proposed which relates externally applied tensile stresses to changes in absorption capacity as well as diffusion rate. The model postulates that changes seen in the diffusion process are the result of stress-dependent changes in the free volume of the epoxy resin. The free volume changes of the resin are calculated through laminate plate theory; the free volume change becomes a function of fiber angle as well as a host of elastic properties of the constituents. Consequently, according to the proposed model, changes in diffusion parameters are dependent upon the magnitude of applied stress, the loading angle, as well as elastic properties of the constituents. In order to experimentally test the proposed model, a series of epoxy glass laminate samples were manufactured at varying fiber angles and submerged in a moist environment while subjected to varying levels of tensile loading. Weight gain measurements we recorded throughout the diffusion process until full saturation was achieved. The experimental values exhibited excellent agreement with the novel theoretical model.en
dc.language.isoenen
dc.publisherMontana State University - Bozeman, College of Engineeringen
dc.subject.lcshStrains and stressesen
dc.subject.lcshMoistureen
dc.subject.lcshComposite materialsen
dc.titleEffects of externally applied tensile stresses on the moisture diffusion characteristics of epoxy glass compositesen
dc.typeThesisen
dc.rights.holderCopyright 2013 by Mark Thomas Stoffelsen
thesis.catalog.ckey2133850en
thesis.degree.committeemembersMembers, Graduate Committee: Douglas S. Cairns; Ron Juneen
thesis.degree.departmentMechanical & Industrial Engineering.en
thesis.degree.genreThesisen
thesis.degree.nameMSen
thesis.format.extentfirstpage1en
thesis.format.extentlastpage85en


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record


MSU uses DSpace software, copyright © 2002-2017  Duraspace. For library collections that are not accessible, we are committed to providing reasonable accommodations and timely access to users with disabilities. For assistance, please submit an accessibility request for library material.