Theses and Dissertations at Montana State University (MSU)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/732
Browse
2 results
Search Results
Item An acoustic emission and hygrothermal aging study of fiber reinforced polymer composites(Montana State University - Bozeman, College of Engineering, 2019) Newhouse, Kai Jeffrey; Chairperson, Graduate Committee: David A. MillerFiber reinforced polymer matrix composites are a premier choice for offshore wind turbines and Marine Hydro-Kinetic Devices, which operate in harsh and isolated marine environments. These factors combined with decades long target service life make imperative the understanding of damage mechanisms and the environmental effects thereof. Acoustic emission monitoring is a research technology that uses specialized sensors to detect transient elastic waves in a material which originate from damage sources. Waveform parameters have been correlated with different damage mechanisms in fibrous composites. A diverse set of fiber-matrix combinations configured into a variety of layups totaling more than 30 laminates were mechanically tested in quasi-static uniaxial tension while monitoring acoustic emission. A subset of these materials was aged prior to testing in an artificial marine environment by soaking in a water bath of simulated seawater at 50 degrees Celsius. Various acoustic emission waveform parameters were investigated with respect to expected damage between layups and possible material-based differences. Among the conditioned material set, mechanical changes from moisture absorption shows mixed levels of degradation among different material systems. Moduli were generally unaffected with a few minor decreases. Strengths were reduced by as much as 41%, and failure strains fell as much as 47%. From acoustic emission investigation, good correlation is found between Fast Fourier Transform peak spectral frequency bands and expected damage mechanisms between layups. Material based peak frequency differences are found exclusively in interphase failures (de-bond and fiber pullout). Layup-based correlations in conjunction with elastic wave theory were used to put forth new frequency band ranges associated with damage types.Item Combining acoustic emission and guided ultrasonic waves for global property prediction and structural health monitoring of glass fiber composites(Montana State University - Bozeman, College of Engineering, 2018) Murdy, Paul; Chairperson, Graduate Committee: David A. MillerSince the turn of the century, wind turbines have been rapidly growing in size and are projected to continue growing as the technology develops. These increases in size have led to increased failure rates of the glass fiber composite turbine blades. Because of this, it is of utmost importance to understand failure mechanisms in glass fiber composites and investigate new approaches to predicting failures. This has led to advancements in structural health monitoring of large composites structures by applying sophisticated sensing technologies, in attempts to evaluate material damage states and predict structural failures before they occur. This research has taken a novel approach to apply multiple ultrasonic monitoring techniques, in the form of acoustic emission and guided ultrasonic waves, simultaneously to the mechanical testing of glass fiber reinforced composite laminates. Testing of the composite laminates was conducted in the form of increasing load-unload-reload static tension tests and tension-tension fatigue tests, to measure modulus degradation of the laminates while applying the monitoring techniques. Acoustic emission was used to detect damage events that occurred within laminates in real-time and guided ultrasonic waves were applied periodically to the laminates to observe changes in wave propagation and relate back to damage severity within the laminates. Furthermore, the acoustic emission and guided ultrasonic wave datasets were combined and used to train multivariate regression models to predict modulus degradation of the laminates tested, with no prior knowledge of the laminates' loading histories. Overall, the predictive models were able to make good predictions and showed the potential for combining multiple monitoring techniques into singular systems and statistical predictive models. This research has shown that the combination of the two measurement techniques can be implemented for more accurate and reliable monitoring of large composite structures than the techniques used individually, with minimal additional hardware. Ultimately, this research has paved the way for a new form of smart structural health monitoring, with superior predictive capabilities, which will benefit the renewable energy through reducing maintenance and repair costs and mitigating the risk of wind turbine blade failures.