Theses and Dissertations at Montana State University (MSU)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/732
Browse
2 results
Search Results
Item Operando optical studies of next generation anode materials in high temperature solid oxide fuel cells(Montana State University - Bozeman, College of Letters & Science, 2020) Welander, Martha Maria; Chairperson, Graduate Committee: Robert Walker; Marley S. Zachariasen, Clay D. Hunt, Stephen W. Sofie and Robert A. Walker were co-authors of the article, 'Operando studies of redox resiliance in alt enhanced NIO-YSZ SOFC anodes' in the journal 'Journal of the electrochemical society' which is contained within this dissertation.; Marley S. Zachariasen, Stephen W. Sofie and Robert A. Walker were co-authors of the article, 'Enhancing Ni-YSZ anode resilience to environmental redox stress with aluminum titanate secondary phases' in the journal 'ACS applied energy materials' which is contained within this dissertation.; Marley S. Zachariasen, Stephen W. Sofie and Robert A. Walker were co-authors of the article, 'Mitigating carbon formation with Al 2TiO 5 enhanced solid oxide fuel cell anodes' in the journal 'The journal of physical chemistry C' which is contained within this dissertation.; Daniel B. Drasbaek, Marie L. Traulsem Bhaskar R. Sudireddy, Peter Holtappels and Robert A. Walker were co-authors of the article, 'What does carbon tolerant really mean? Operando vibrational studies of carbon accumulation on novel solid ocide fuel cell anodes prepared by infiltration' submitted to the journal 'RSC physical chemistry chemical physics' which is contained within this dissertation.; Disseration contains an article of which Martha Maria Welander is not the main author.Solid oxide fuel cells (SOFCs) are high temperature energy conversion devices capable of efficient and sustainable energy production. Because of the need to electrochemically reduce molecular oxygen and the relatively high activation energy required for oxide ions to diffuse through the dense, solid-state electrolyte, SOFCs typically operate at temperatures > or = 500 °C. High operating temperatures endow SOFCs with many advantages, including fuel flexibility and high conversion efficiencies, distinguishing them from other types of fuel cells. However, high temperatures also present challenges related to the stability of the electrode materials, accelerating cell degradation and limiting the development and integration of SOFCs into large scale power production strategies. These mechanisms are the result of fundamental changes in material properties that remain poorly described and difficult to predict. Studies presented in this work utilized operando Raman spectroscopy and electrochemical measurements to directly correlate material changes with changes in cell performance under various operating conditions. Research focused on developing and characterizing new electro-catalytic materials having improved conversion efficiencies and mechanical resilience to thermal and chemical stress. Because current state of the art SOFC Ni-YSZ cermet anodes are sensitive to oxidation, the first two studies investigated the effects of adding small amounts of Al 2TiO 5 to Ni-YSZ anodes and the impact of resulting secondary (2°) phases that formed on SOFC tolerance to electrochemical and environmental reduction and oxidation (redox) cycling. Results show that Al 2TiO 5 helps improve tolerance to both types of redox cycling by maintaining electrode-electrolyte connectivity and minimizing catalyst coarsening. The third study illustrates how this same dopant improved anode carbon tolerance when operating with hydrocarbon fuels. Because excessive carbon accumulation on SOFC anodes can lead to rapid cell failure, ways to improve carbon tolerance was further explored in the last two studies. These studies investigate the effect of decoupling the electro-catalytic and the electronically conductive phases of the anode under pure methane and biogas-surrogate environments. Collectively, the studies described in this dissertation provide insight into the materials-specific mechanisms responsible for limiting degradation of doped and functionally decoupled anodes to help guide the design of new SOFC electrode materials.Item Sr 2-x VMoO 6-Y double perovskites : a new generation of solid oxide fuel cell anodes(Montana State University - Bozeman, College of Letters & Science, 2013) Childs, Nicholas Brule; Chairperson, Graduate Committee: Richard J. Smith; Cameron Law, Richard Smith, Stephen Sofie, Camas Key, Michael Kopcyzk and Michael Lerch were co-authors of the article, 'Electronic current distribution calculation for a NI-YSZ solid oxide fuel cell anode' in the journal 'Fuel cells' which is contained within this thesis.Fuel cells are an attractive power source due to their ability to efficiently convert chemical energy stored in fuel directly into electricity. The ability of Solid Oxide Fuel Cells (SOFCs) to reform hydrocarbons at the anode provides for fuel flexibility, an advantage over other types of fuel cell technologies. The primary goals of this dissertation were to investigate the limitations of the currently used anode cermet material, synthesize a double perovskite material (Sr ₂₋xVMoO ₆₋y) without these limitations and investigate the electrical conduction properties of this mixed ionic and electronic conductor (MEIC) in a SOFC anode environment. The electronic current density limitation of a Ni-YSZ anode was determined through the development of a computer simulation and use of experimental data. The electronic current density distribution for nickel particles in a Ni-YSZ anode was calculated via a Monte-Carlo percolation model. Experiments were performed to determine the failure current densities of thin nickel wires in a SOFC anode environment. The results show a current density limitation of Ni-YSZ anodes that is not expected with MEIC anodes. A MEIC anode material, Sr ₂₋xVMoO ₆₋y, was synthesized and characterized using a variety of techniques. The expected MEIC nature of this perovskite material eliminates a potential anode limitation, while adding other benefits over Ni-YSZ. X-ray diffraction (XRD) was used to verify crystal structure. In contrast to the trace amounts of secondary insulating phases found through XRD, XPS shows a high percentage (85-90%) of these secondary phases at the surface. The electrical conductivity of Sr ₂₋xVMoO ₆₋y was found to exceed that reported for Ni-YSZ anodes in a typical SOFC anode environment. Polycrystalline Sr 1.9VMoO ₆₋y'' samples exhibited higher electrical conductivity than that reported for SrMoO ₃ polycrystalline samples, making it a candidate for being the highest electrical conducting oxide known. These conduction values were only measured after specific thermal treatments in a reducing atmosphere. These treatments reduced secondary surface phases, Sr ₃V ₂O ₈ and SrMoO ₄, into their more conducting counterparts, SrVO ₃ and SrMoO ₃. Vanadium and molybdenum valence state XPS fitting parameters for primary and secondary phases are reported.