Scholarly Work - Electrical & Computer Engineering
Permanent URI for this collectionhttps://scholarworks.montana.edu/handle/1/8814
Browse
4 results
Search Results
Item Teaching and learning geometric optics in middle school through the Turning Eyes to the Big Sky project(2013-06) Leonard, M. J.; Hannahoe, R. M.; Nollmeyer, Gustave E.; Shaw, Joseph A.The Turning Eyes to the Big Sky project offered schools in southwestern Montana a unique opportunity to strengthen science instruction. The project implemented, in a formal setting, a nationally established informal science curriculum on light and optics, the Hands-on Optics Terrific Telescopes curriculum. Terrific Telescopes was implemented in eight middle-school classrooms and reached 166 students during the 2010 to 2011 school year. As part of the project, we conducted a teacher workshop and assessed student learning outcomes and teachers’ experiences with the curriculum. The goals of our assessments were to improve our understanding of how students learn key optics-related principles, provide evidence of the learning outcomes of Terrific Telescopes, and find out how teachers adapt the curriculum for use in formal settings. Our research established that students in every classroom learned optics concepts, uncovered student ideas about telescope optics, and identified ways to support and supplement the curriculum for use in classrooms.Item Infrared cloud imager development for atmospheric optical communication characterization, and measurements at the JPL Table Mountain Facility(2013-02) Nugent, Paul W.; Shaw, Joseph A.; Piazzolla, S.The continuous demand for high data return in deep space and near-Earth satellite missions has led NASA and international institutions to consider alternative technologies for high-data-rate communications. One solution is the establishment of widebandwidth Earth–space optical communication links, which require (among other things) a nearly obstruction-free atmospheric path. Considering the atmospheric channel, the most common and most apparent impairments on Earth–space optical communication paths arise from clouds. Therefore, the characterization of the statistical behavior of cloud coverage for optical communication ground station candidate sites is of vital importance. In this article, we describe the development and deployment of a ground-based, long-wavelength infrared cloud imaging system able to monitor and characterize the cloud coverage. This system is based on a commercially available camera with a 62-deg diagonal field of view. A novel internal-shutter-based calibration technique allows radiometric calibration of the camera, which operates without a thermoelectric cooler. This cloud imaging system provides continuous day–night cloud detection with constant sensitivity. The cloud imaging system also includes data-processing algorithms that calculate and remove atmospheric emission to isolate cloud signatures, and enable classification of clouds according to their optical attenuation. Measurements of long-wavelength infrared cloud radiance are used to retrieve the optical attenuation (cloud optical depth due to absorption and scattering) in the wavelength range of interest from visible to near-infrared, where the cloud attenuation is quite constant. This article addresses the specifics of the operation, calibration, and data processing of the imaging system that was deployed at the NASA/JPL Table Mountain Facility (TMF) in California. Data are reported from July 2008 to July 2010. These data describe seasonal variability in cloud cover at the TMF site, with cloud amount (percentage of cloudy pixels) peaking at just over 51 percent during February, of which more than 60 percent had optical attenuation exceeding 12 dB at wavelengths in the range from the visible to the near-infrared. The lowest cloud amount was found during August, averaging 19.6 percent, and these clouds were mostly optically thin, with low attenuation.Item Correcting for focal-plane-array temperature dependence in microbolometer infrared cameras lacking thermal stabilization(2013-01) Nugent, Paul W.; Shaw, Joseph A.; Pust, Nathan J.Advances in microbolometer detectors have led to the development of infrared cameras that operate without active temperature stabilization. The response of these cameras varies with the temperature of the camera’s focal plane array (FPA). This paper describes a method for stabilizing the camera’s response through software processing. This stabilization is based on the difference between the camera’s response at a measured temperature and at a reference temperature. This paper presents the mathematical basis for such a correction and demonstrates the resulting accuracy when applied to a commercially available long-wave infrared camera. The stabilized camera was then radiometrically calibrated so that the digital response from the camera could be related to the radiance or temperature of objects in the scene. For FPA temperature deviations within ±7.2°C changing by 0.5°C/min, this method produced a camera calibration with spatial-temporal rms variability of 0.21°C, yielding a total calibration uncertainty of 0.38°C limited primarily by the 0.32°C uncertainty in the blackbody source emissivity and temperature.Item Radiometric calibration of infrared imagers using an internal shutter as an equivalent external blackbody(2014-12) Nugent, Paul W.; Shaw, Joseph A.; Pust, Nathan J.Advances in microbolometer long-wave infrared (LWIR) detectors have led to the common use of infrared cameras that operate without active temperature stabilization, but the response of these cameras varies with their own temperature. Therefore, obtaining quantitative data requires a calibration that compensates for these errors. This paper describes a method for stabilizing the camera’s response through software processing of consecutive images of the scene and images of the camera’s internal shutter. An image of the shutter is processed so that it appears as if it were viewed through the lens. The differences between the scene and the image of the shutter treated as an external blackbody are then related to the radiance or temperature of the objects in the scene. This method has been applied to two commercial LWIR cameras over a focal plane array temperature range of ±7.2°C, changing at a rate of up to ±0.5°C/min. During these tests, the rms variability of the camera output was reduced from ±4.0°C to ±0.26°C.