Scholarly Work - Center for Biofilm Engineering
Permanent URI for this collectionhttps://scholarworks.montana.edu/handle/1/9335
Browse
19 results
Search Results
Item Carbon chain length of biofuel- and flavor-relevant volatile organic compounds produced by lignocellulolytic fungal endophytes changes with culture temperature(2017-09) Schoen, Heidi R.; Hunt, Kristopher A.; Strobel, Gary A.; Peyton, Brent M.; Carlson, Ross P.Three fungal endophytes from the genus Nodulisporium were studied for volatile organic compound (VOC) production. All three fungi grew on a wide range of carbon substrates ranging from simple sugars to waste biomass sources. The fungi synthesized a number of long and short-chain VOCs, including eucalyptol; 1-butanol, 3-methyl; 1-octen-3-ol; and benzaldehyde, all with potential applications as biofuel or flavor compounds. As culture temperature decreased, average VOC carbon chain length increased, especially for VOCs associated with fatty acid metabolism. The results provide a template for controlling synthesis of desired VOCs through selection of species and culturing conditions.Item Synthesis of poly [(r)-3-hydroxybutyric acid) in the cytoplasm of Pichia pastoris under oxygen limitation(2005-03) Vijayasankaran, Natarajan; Carlson, Ross P.; Srienc, FriedrichWe have constructed a tandem gene expression cassette containing three Ralstonia eutropha poly[(R)-3-hydroxybutyrate] (PHB) synthesis genes under the control of the Pichia pastoris glyceraldehyde-3-phosphate promoter and the green fluorescent protein (Gfp) under the control of the P. pastoris alcohol oxidase promoter. The inducible Gfp reporter protein has been used to rapidly isolate transformed strains with two copies of the entire expression cassette. The isolated strain exhibits Gfp induction kinetics that is twice as fast as that of the strains isolated without cell sorting. In addition, the sorted strains exhibited higher PHB contents in preliminary screening experiments. PHB synthesis was characterized in more detail in the sorted strain and was found to be dependent on culture conditions. It was observed that the specific PHB synthesis rate was dependent on the carbon source utilized and that the conditions of oxygen stress lead to increased fractional PHB content. When this strain is cultivated on glucose under oxygen-limited conditions, the cultures accumulated ethanol during the initial growth phase and then consumed the ethanol for the accumulation of PHB and biomass. While PHB was not synthesized during initial growth on glucose, significant levels of PHB were synthesized when ethanol was subsequently consumed. PHB was also synthesized under aerobic conditions when ethanol was the only carbon source. During growth on ethanol, the specific growth rate of the culture was reduced under oxygen-limited conditions but the specific PHB synthesis rate was relatively unaffected. Thus, the high accumulation of PHB which exceeded 30% of the cell dry weight appears to be the consequence of the decreased biomass growth rate under severe oxygen limitation.Item Staining and quantification of poly-3-hydroxybutyrate in Saccharomyces cerevisiae and Cupriavidus necator cell populations using automated flow cytometry(2005) Kacmar, James; Carlson, Ross P.; Balogh, Steven J.; Srienc, FriedrichBackground: Poly [(R)-3-hydroxybutyric acid] (PHB) is a prokaryote storage material for carbon and energy that accumulates in cells under unbalanced growth conditions. Because this class of biopolymers has plastic-like properties, it has attracted considerable interest for biomedical applications and as a biodegradable commodity plastic. Current flow cytometric techniques to quantify intracellular PHB are based on Nile red. Here, an improved cytometric technique for cellular PHB quantification utilizing BODIPY 493/503 staining was developed. This technique was then automated using an automated flow cytometry system. Materials: Using flow cytometry, the fluorescence of Saccharomyces cerevisiae and Cupriavidus necator with varying PHB content after staining with BODIPY 493/503 and Nile red was compared, and automated staining techniques were developed for both cultures. Results: BODIPY 493/503 staining had less background staining, higher sensitivity and specificity to PHB, and higher saturation values than did Nile red staining. The developed automated staining procedure was capable of analyzing the PHB content of a bioreactor sample every 25 min and measured the average PHB content with accuracy comparable to offline GC analysis. Conclusion: BODIPY 493/503 produced an overall better staining for PHB than did Nile red. When combined with the automated system, this technique provides a new method for the online monitoring and control of bioreactors.Item Kinetic Studies and Biochemical Pathway Analysis of Anaerobic Poly-(R)-3-Hydroxybutyric Acid Synthesis in Escherichia coli(2005-02) Carlson, Ross P.; Wlaschin, Aaron P; Srienc, FriedrichPoly-(R)-3-hydroxybutyric acid (PHB) was synthesized anaerobically in recombinant Escherichia coli. The host anaerobically accumulated PHB to more than 50% of its cell dry weight during cultivation in either growth or nongrowth medium. The maximum specific PHB production rate during growth-associated synthesis was approximately 2.3 ± 0.2 mmol of PHB/g of residual cell dry weight/h. The by-product secretion profiles differed significantly between the PHB-synthesizing strain and the control strain. PHB production decreased acetate accumulation for both growth and nongrowth-associated PHB synthesis. For instance under nongrowth cultivation, the PHB-synthesizing culture produced approximately 66% less acetate on a glucose yield basis as compared to a control culture. A theoretical biochemical network model was used to provide a rational basis to interpret the experimental results like the fermentation product secretion profiles and to study E. coli network capabilities under anaerobic conditions. For example, the maximum theoretical carbon yield for anaerobic PHB synthesis in E. coli is 0.8. The presented study is expected to be generally useful for analyzing, interpreting, and engineering cellular metabolisms.Item Engineering the monomer composition of polyhydroxyalkanoates synthesized in Saccharomyces cerevisiae(2006-01) Zhang, Bo; Carlson, Ross P.; Srienc, FriedrichPolyhydroxyalkanoates (PHAs) have received considerable interest as renewable-resource-based, biodegradable, and biocompatible plastics with a wide range of potential applications. We have engineered the synthesis of PHA polymers composed of monomers ranging from 4 to 14 carbon atoms in either the cytosol or the peroxisome of Saccharomyces cerevisiae by harnessing intermediates of fatty acid metabolism. Cytosolic PHA production was supported by establishing in the cytosol critical -oxidation chemistries which are found natively in peroxisomes. This platform was utilized to supply medium-chain (C6 to C14) PHA precursors from both fatty acid degradation and synthesis to a cytosolically expressed medium-chain-length (mcl) polymerase from Pseudomonas oleovorans. Synthesis of short-chain-length PHAs (scl-PHAs) was established in the peroxisome of a wild-type yeast strain by targeting the Ralstonia eutropha scl polymerase to the peroxisome. This strain, harboring a peroxisomally targeted scl-PHA synthase, accumulated PHA up to approximately 7% of its cell dry weight. These results indicate (i) that S. cerevisiae expressing a cytosolic mcl-PHA polymerase or a peroxisomal scl-PHA synthase can use the 3-hydroxyacyl coenzyme A intermediates from fatty acid metabolism to synthesize PHAs and (ii) that fatty acid degradation is also possible in the cytosol as β-oxidation might not be confined only to the peroxisomes. Polymers of even-numbered, odd-numbered, or a combination of even- and odd-numbered monomers can be controlled by feeding the appropriate substrates. This ability should permit the rational design and synthesis of polymers with desired material properties.Item Effects of recombinant precursor pathway variations on poly[(r)-3-hydroxybutyrate] synthesis in Saccharomyces cerevisiae(2006-07) Carlson, Ross P.; Srienc, FriedrichDifferent recombinant R-3-hydroxybutyryl-CoA (3-HB) synthesis pathways strongly influenced the rate and accumulation of the biopolymer poly[(R)-3-hydroxybutyrate] (PHB) in Saccharomyces cerevisiae. It has been previously shown that expression of the Cupriavidus necator PHB synthase gene leads to PHB accumulation in S. cerevisiae [Leaf, T., Peterson, M., Stoup, S., Somers, D., Srienc, F., 1996. Saccharomyces cerevisiae expressing bacterial polyhydroxybutyrate synthase produces poly-3-hydroxybutyrate. Microbiology 142, 110]. This finding indicates that native S. cerevisiae expresses genes capable of synthesizing the correct stereochemical substrate for the synthase enzyme. The effects of variations of 3-HB precursor pathways on PHB accumulation were investigated by expressing combinations of C. necator PHB pathway genes. When only the PHB synthase gene was expressed, the cells accumulated biopolymer to approximately 0.2% of their cell dry weight. When the PHB synthase and reductase gene were co-expressed, the PHB levels increased approximately 18 fold to about 3.5% of the cell dry weight. When the beta-ketothiolase, reductase and synthase genes were all expressed, the strain accumulated PHB to approximately 9% of the cell dry weight which is 45 fold higher than in the strain with only the synthase gene. Fluorescent microscopic analysis revealed significant cell-to-cell heterogeneity in biopolymer accumulation. While the population average for the strain expressing three PHB genes was approximately 9% of the cell dry weight, some cells accumulated PHB in excess of 50% of their cell volume. Other cells accumulated no biopolymer. In addition, the recombinant strain was shown to co-produce ethanol and PHB under anaerobic conditions. These results demonstrate that the technologically important organism S. cerevisiae is capable of accumulating PHB aerobically and anaerobically at levels similar to some bacterial systems. The easily assayed PHB system also creates a convenient means of probing in vivo the presence of intracellular metabolites which could be useful for studying the intermediary metabolism of S. cerevisiae.Item Decomposition of complex microbial behaviors into resource-based stress responses(2008-11) Carlson, Ross P.Motivation: Highly redundant metabolic networks and experimental data from cultures likely adapting simultaneously to multiple stresses can complicate the analysis of cellular behaviors. It is proposed that the explicit consideration of these factors is critical to understanding the competitive basis of microbial strategies.Results: Wide ranging, seemingly unrelated Escherichia coli physiological fluxes can be simply and accurately described as linear combinations of a few ecologically relevant stress adaptations. These strategies were identified by decomposing the centralmetabolism of E.coli into elementary modes (mathematically defined biochemical pathways) and assessing the resource investment cost– benefit properties for each pathway. The approach capitalizes on the inherent tradeoffs related to investing finite resources like nitrogen into different pathway enzymes when the pathways have varying metabolic efficiencies. The subset of ecologically competitive pathways represented 0.02% of the total permissible pathways. The biological relevance of the assembled strategies was tested against 10 000 randomly constructed pathway subsets. None of the randomly assembled collections were able to describe all of the considered experimental data as accurately as the costbased subset. The results suggest these metabolic strategies are biologically significant. The current descriptions were compared with linear programming (LP)-based flux descriptions using the Euclidean distance metric. The current study’s pathway subset described the experimental fluxes with better accuracy than the LP results without having to test multiple objective functions or constraints and while providing additional ecological insight into microbial behavior. The assembled pathways seem to represent a generalized set of strategies that can describe a wide range of microbial responses and hint at evolutionary processes where a handful of successful metabolic strategies are utilized simultaneously in different combinations to adapt to diverse conditions.Item In silico approaches to study mass and energy flows in microbial consortia: A syntrophic case study(2009) Taffs, Reed L.; Aston, John E.; Brileya, Kristen A.; Jay, Zackary J.; Klatt, Christian G.; McGlynn, Shawn E.; Inskeep, William P.; Ward, David M.; Carlson, Ross P.Background: Three methods were developed for the application of stoichiometry-based network analysis approaches including elementary mode analysis to the study of mass and energy flows in microbial communities. Each has distinct advantages and disadvantages suitable for analyzing systems with different degrees of complexity and a priori knowledge. These approaches were tested and compared using data from the thermophilic, phototrophic mat communities from Octopus and Mushroom Springs in Yellowstone National Park (USA). The models were based on three distinct microbial guilds: oxygenic phototrophs, filamentous anoxygenic phototrophs, and sulfate-reducing bacteria. Two phases, day and night, were modeled to account for differences in the sources of mass and energy and the routes available for their exchange.ResultsThe in silico models were used to explore fundamental questions in ecology including the prediction of and explanation for measured relative abundances of primary producers in the mat, theoretical tradeoffs between overall productivity and the generation of toxic by-products, and the relative robustness of various guild interactions.Conclusion: The three modeling approaches represent a flexible toolbox for creating cellular metabolic networks to study microbial communities on scales ranging from cells to ecosystems. A comparison of the three methods highlights considerations for selecting the one most appropriate for a given microbial system. For instance, communities represented only by metagenomic data can be modeled using the pooled method which analyzes a community's total metabolic potential without attempting to partition enzymes to different organisms. Systems with extensive a priori information on microbial guilds can be represented using the compartmentalized technique, employing distinct control volumes to separate guild-appropriate enzymes and metabolites. If the complexity of a compartmentalized network creates an unacceptable computational burden, the nested analysis approach permits greater scalability at the cost of more user intervention through multiple rounds of pathway analysis. The electronic version of this article is the complete one and can be found online at: http://www.biomedcentral.com/1752-0509/3/114Item Anti-biofilm properties of chitosan-coated surfaces(2008-01) Carlson, Ross P.; Taffs, Reed L.; Davison, William Marshall; Stewart, Philip S.Surfaces coated with the naturally-occurring polysaccharide chitosan (partially deacetylated poly N-acetyl glucosamine) resisted biofilm formation by bacteria and yeast. Reductions in biofilm viable cell numbers ranging from 95% to 99.9997% were demonstrated for Staphylococcus epidermidis, Staphylococcus aureus, Klebsiella pneumoniae, Pseudomonas aeruginosa and Candida albicans on chitosan-coated surfaces over a 54-h experiment in comparison to controls. For instance, chitosan-coated surfaces reduced S. epidermidis surface-associated growth more than 5.5 10log units (99.9997%) compared to a control surface. As a comparison, coatings containing a combination of the antibiotics minocycline and rifampin reduced S. epidermidis growth by 3.9 10log units (99.99%) and coatings containing the antiseptic chlorhexidine did not significantly reduce S. epidermidis surface associated growth as compared to controls. The chitosan effects were confirmed with microscopy. Using time-lapse fluorescence microscopy and fluorescent-dye-loaded S. epidermidis, the permeabilization of these cells was observed as they alighted on chitosan-coated surfaces. This suggests chitosan disrupts cell membranes as microbes settle on the surface. Chitosan offers a flexible, biocompatible platform for designing coatings to protect surfaces from infection.Item Nanoscale Structural and Mechanical Properties of Nontypeable Haemophilus influenzae Biofilms(2009-02) Arce, Fernando Teran; Carlson, Ross P.; Monds, James; Veeh, Richard Harold; Hu, Fen Z.; Stewart, Philip S.; Lal, Ratnesh; Ehrlich, Garth D.; Avci, RecepNontypeable Haemophilus influenzae (NTHI) bacteria are commensals in the human nasopharynx, as well as pathogens associated with a spectrum of acute and chronic infections. Two important factors that influence NTHI pathogenicity are their ability to adhere to human tissue and their ability to form biofilms. Extracellular polymeric substances (EPS) and bacterial appendages such as pili critically influence cell adhesion and intercellular cohesion during biofilm formation. Structural components in the outer cell membrane, such as lipopolysaccharides, also play a fundamental role in infection of the host organism. In spite of their importance, these pathogenic factors are not yet well characterized at the nanoscale. Here, atomic force microscopy (AFM) was used in aqueous environments to visualize structural details, including probable Hif-type pili, of live NTHI bacteria at the early stages of biofilm formation. Using single-molecule AFM-based spectroscopy, the molecular elasticities of lipooligosaccharides present on NTHI cell surfaces were analyzed and compared between two strains (PittEE and PittGG) with very different pathogenicity profiles. Furthermore, the stiffness of single cells of both strains was measured and subsequently their turgor pressure was estimated.