Scholarly Work - Center for Biofilm Engineering

Permanent URI for this collectionhttps://scholarworks.montana.edu/handle/1/9335

Browse

Search Results

Now showing 1 - 10 of 31
  • Thumbnail Image
    Item
    Subsurface hydrocarbon degradation strategies in low- and high-sulfate coal seam communities identified with activity-based metagenomics
    (Springer Science and Business Media LLC, 2022-02) Schweitzer, Hannah D.; Smith, Heidi J.; Barnhart, Elliott P.; McKay, Luke J.; Gerlach, Robin; Cunningham, Alfred B.; Malmstrom, Rex R.; Goudeau, Danielle; Fields, Matthew W.
    Environmentally relevant metagenomes and BONCAT-FACS derived translationally active metagenomes from Powder River Basin coal seams were investigated to elucidate potential genes and functional groups involved in hydrocarbon degradation to methane in coal seams with high- and low-sulfate levels. An advanced subsurface environmental sampler allowed the establishment of coal-associated microbial communities under in situ conditions for metagenomic analyses from environmental and translationally active populations. Metagenomic sequencing demonstrated that biosurfactants, aerobic dioxygenases, and anaerobic phenol degradation pathways were present in active populations across the sampled coal seams. In particular, results suggested the importance of anaerobic degradation pathways under high-sulfate conditions with an emphasis on fumarate addition. Under low-sulfate conditions, a mixture of both aerobic and anaerobic pathways was observed but with a predominance of aerobic dioxygenases. The putative low-molecular-weight biosurfactant, lichysein, appeared to play a more important role compared to rhamnolipids. The methods used in this study—subsurface environmental samplers in combination with metagenomic sequencing of both total and translationally active metagenomes—offer a deeper and environmentally relevant perspective on community genetic potential from coal seams poised at different redox conditions broadening the understanding of degradation strategies for subsurface carbon.
  • Thumbnail Image
    Item
    Addressing wellbore integrity and thief zone permeability using microbially-induced calcium carbonate precipitation (MICP): A field demonstration
    (Elsevier BV, 2020-02) Kirkland, Catherine M.; Thane, Abby; Hiebert, Randy; Hyatt, Robert; Kirksey, Jim; Cunningham, Alfred B.; Gerlach, Robin; Spangler, Lee; Philips, Adrienne J.
    Microbially-induced calcium carbonate precipitation (MICP) is an emerging biotechnology for wellbore integrity applications including sealing defects in wellbore cement and modifying the permeability of rock formations. The goal of this field demonstration was to characterize a failed waterflood injection well and provide proof of principle that MICP can reduce permeability in the presence of oil using conventional oilfield fluid delivery methods. We compared well logs performed at the time the well was drilled with ultrasonic logs, sonic cement evaluation, and temperature logs conducted after the well failed. Analysis of these logs suggested that, rather than entering the target waterflood formation, injectate was traveling through defects in the well cement to a higher permeability sandstone layer above the target formation. Sporosarcina pasteurii cultures and urea-calcium media were delivered 2290 ft (698 m) below ground surface using a 3.75 gal (14.2 L) slickline dump bailer to promote mineralization in the undesired flow paths. By Day 6 and after 25 inoculum and 49 calcium media injections, the injectivity [gpm/psi] had decreased by approximately 70%. This demonstration shows that 1) common well logs can be used to identify scenarios where MICP can be employed to reduce system permeability, remediate leakage pathways, and improve waterflood efficiency, and 2) MICP can occur in the presence of hydrocarbons.
  • Thumbnail Image
    Item
    Characterizing the structure of aerobic granular sludge using ultra-high field magnetic resonance
    (IWA Publishing, 2020-08) Kirkland, Catherine M.; Krug, Julia R.; Vergeldt, Frank J.; van den Berg, Lenno; Velders, Aldrik H.; Seymour, Joseph D.; Codd, Sarah L.; Van As, Henk; de Kreuk, Merle K.
    Despite aerobic granular sludge wastewater treatment plants operating around the world, our understanding of internal granule structure and its relation to treatment efficiency remains limited. This can be attributed in part to the drawbacks of time-consuming, labor-intensive, and invasive microscopy protocols which effectively restrict samples sizes and may introduce artefacts. Timedomain nuclear magnetic resonance (NMR) allows non-invasive measurements which describe internal structural features of opaque, complex materials like biofilms. NMR was used to image aerobic granules collected from five full-scale wastewater treatment plants in the Netherlands and United States, as well as laboratory granules and control beads. T1 and T2 relaxation-weighted images reveal heterogeneous structures that include high- and low-density biofilm regions, waterlike voids, and solid-like inclusions. Channels larger than approximately 50 μm and connected to the bulk fluid were not visible. Both cluster and ring-like structures were observed with each granule source having a characteristic structural type. These structures, and their NMR relaxation behavior, were stable over several months of storage. These observations reveal the complex structures within aerobic granules from a range of sources and highlight the need for non-invasive characterization methods like NMR to be applied in the ongoing effort to correlate structure and function.
  • Thumbnail Image
    Item
    Heterogeneous diffusion in aerobic granular sludge
    (Wiley, 2020-08) van den Berg, Lenno; Kirkland, Catherine M.; Seymour, Joseph D.; Codd, Sarah L.; Van Loosdrecht, Mark C. M.; de Kreuk, Merle K.
    Aerobic granular sludge (AGS) technology allows simultaneous nitrogen, phosphorus, and carbon removal in compact wastewater treatment processes. To operate, design, and model AGS reactors, it is essential to properly understand the diffusive transport within the granules. In this study, diffusive mass transfer within full‐scale and lab‐scale AGS was characterized with nuclear magnetic resonance (NMR) methods. Self‐diffusion coefficients of water inside the granules were determined with pulsed‐field gradient NMR, while the granule structure was visualized with NMR imaging. A reaction‐diffusion granule‐scale model was set up to evaluate the impact of heterogeneous diffusion on granule performance. The self‐diffusion coefficient of water in AGS was ∼70% of the self‐diffusion coefficient of free water. There was no significant difference between self‐diffusion in AGS from full‐scale treatment plants and from lab‐scale reactors. The results of the model showed that diffusional heterogeneity did not lead to a major change of flux into the granule (<1%). This study shows that differences between granular sludges and heterogeneity within granules have little impact on the kinetic properties of AGS. Thus, a relatively simple approach is sufficient to describe mass transport by diffusion into the granules.
  • Thumbnail Image
    Item
    Temperature‐dependent inactivation and catalysis rates of plant‐based ureases for engineered biomineralization
    (Wiley, 2020-11) Feder, Marnie J.; Akyel, Arda; Morasko, Vincent J.; Gerlach, Robin; Phillips, Adrienne J.
    Engineered (bio)mineralization uses the enzyme urease to catalyze the hydrolysis of urea to promote carbonate mineral precipitation. The current study investigates the influence of temperature on ureolysis rate and degree of inactivation of plant-sourced ureases over a range of environmentally relevant temperatures. Batch experiments at 30◦C demonstrated that jack bean meal (JBM) has a 1.7 to 56 times higher activity (844 μmol urea hydrolyzed g−1 JBM min−1) than the other tested plant-sourced ureases (soybean, pigeon pea and cottonseed). Hence, ureolysis and enzyme inactivation rates were evaluated for JBM at temperatures between 20◦C and 80◦C. A combined first-order urea hydrolysis and first-order enzyme inactivation model described the inactivation of urease over the investigated range of temperatures. The temperature-dependent rate coefficients (kurea) increased with temperature and ranged from 0.0018 at 20◦C to 0.0249 L g−1 JBM min−1 at 80◦C; JBM urease became ≥50% inactivated in as little as 5.2 minutes at 80◦C and in as long as 2238 minutes at 50◦C. The combined urea hydrolysis kinetics and enzyme inactivation model provides a mathematical relationship useful for the design of biomineralization technologies and can be incorporated into reactive transport models
  • Thumbnail Image
    Item
    In Silico Analysis of Functionalized Hydrocarbon Production Using Ehrlich Pathway and Fatty Acid Derivatives in an Endophytic Fungus
    (MDPI, 2021-05) Hunt, Kristopher A.; Mallette, Natasha D.; Peyton, Brent M.; Carlson, Ross P.
    Functionalized hydrocarbons have various ecological and industrial uses, from signaling molecules and antifungal/antibacterial agents to fuels and specialty chemicals. The potential to produce functionalized hydrocarbons using the cellulolytic, endophytic fungus, Ascocoryne sarcoides, was quantified using genome-enabled, stoichiometric modeling. In silico analysis identified available routes to produce these hydrocarbons, including both anabolic- and catabolic-associated strategies, and determined correlations between the type and size of the hydrocarbons and culturing conditions. The analysis quantified the limits of the wild-type metabolic network to produce functionalized hydrocarbons from cellulose-based substrates and identified metabolic engineering targets, including cellobiose phosphorylase (CP) and cytosolic pyruvate dehydrogenase complex (PDHcyt). CP and PDHcyt activity increased the theoretical production limits under anoxic conditions where less energy was extracted from the substrate. The incorporation of both engineering targets resulted in near-complete conservation of substrate electrons in functionalized hydrocarbons. The in silico framework was integrated with in vitro fungal batch growth experiments to support O2 limitation and functionalized hydrocarbon production predictions. The metabolic reconstruction of this endo-phytic filamentous fungus describes pathways for both specific and general production strategies of 161 functionalized hydrocarbons applicable to many eukaryotic hosts.
  • Thumbnail Image
    Item
    Low-Temperature Biosurfactants from Polar Microbes
    (MDPI AG, 2020-08) Trudgeon, Benjamin; Dieser, Markus; Balasubramanian, Narayanaganesh; Messmer, Mitch; Foreman, Christine M.
    Surfactants, both synthetic and natural, are used in a wide range of industrial applications, including the degradation of petroleum hydrocarbons. Organisms from extreme environments are well-adapted to the harsh conditions and represent an exciting avenue of discovery of naturally occurring biosurfactants, yet microorganisms fromcold environments have been largely overlooked for their biotechnological potential as biosurfactant producers. In this study, four cold-adapted bacterial isolates from Antarctica are investigated for their ability to produce biosurfactants. Here we report on the physical properties and chemical structure of biosurfactants from the genera Janthinobacterium, Psychrobacter, and Serratia. These organisms were able to grow on diesel, motor oil, and crude oil at 4  C. Putative identification showed the presence of sophorolipids and rhamnolipids. Emulsion index test (E24) activity ranged from 36.4–66.7%. Oil displacement tests were comparable to 0.1–1.0% sodium dodecyl sulfate (SDS) solutions. Data presented herein are the first report of organisms of the genus Janthinobacterium to produce biosurfactants and their metabolic capabilities to degrade diverse petroleum hydrocarbons. The organisms’ ability to produce biosurfactants and grow on different hydrocarbons as their sole carbon and energy source at low temperatures (4  C) makes them suitable candidates for the exploration of hydrocarbon bioremediation in low-temperature environments.
  • Thumbnail Image
    Item
    Biomineralization of Plastic Waste to Improve the Strength of Plastic-Reinforced Cement Mortar
    (2021-04) Kane, Seth; Thane, Abby; Espinal, Michael; Lunday, Kendra; Armagan, Hakan; Phillips, Adrienne J.; Heveran, Chelsea M.; Ryan, Cecily A.
    The development of methods to reuse large volumes of plastic waste is essential to curb the environmental impact of plastic pollution. Plastic-reinforced cementitious materials (PRCs), such as plastic-reinforced mortar (PRM), may be potential avenues to productively use large quantities of low-value plastic waste. However, poor bonding between the plastic and cement matrix reduces the strength of PRCs, limiting its viable applications. In this study, calcium carbonate biomineralization techniques were applied to coat plastic waste and improved the compressive strength of PRM. Two biomineralization treatments were examined: enzymatically induced calcium carbonate precipitation (EICP) and microbially induced calcium carbonate precipitation (MICP). MICP treatment of polyethylene terephthalate (PET) resulted in PRMs with compressive strengths similar to that of plastic-free mortar and higher than the compressive strengths of PRMs with untreated or EICP-treated PET. Based on the results of this study, MICP was used to treat hard-to-recycle types 3–7 plastic waste. No plastics investigated in this study inhibited the MICP process. PRM samples with 5% MICP-treated polyvinyl chloride (PVC) and mixed type 3–7 plastic had compressive strengths similar to plastic-free mortar. These results indicate that MICP treatment can improve PRM strength and that MICP-treated PRM shows promise as a method to reuse plastic waste.
  • Thumbnail Image
    Item
    Kinetics of Calcite Precipitation by Ureolytic Bacteria under Aerobic and Anaerobic Conditions
    (2019-05) Mitchell, Andrew C.; Espinosa-Ortiz, Erika J.; Parks, Stacy L.; Phillips, Adrienne J.; Cunningham, Alfred B.; Gerlach, Robin
    The kinetics of urea hydrolysis (ureolysis) and induced calcium carbonate (CaCO3) precipitation for engineering use in the subsurface was investigated under aerobic conditions using Sporosarcina pasteurii (ATCC strain 11859) as well as Bacillus sphaericus strains 21776 and 21787. All bacterial strains showed ureolytic activity inducing CaCO3 precipitation aerobically. Rate constants not normalized to biomass demonstrated slightly higher-rate coefficients for both ureolysis (kurea) and CaCO3 precipitation (kprecip) for B. sphaericus 21776 (kurea=0.10±0.03 h−1, kprecip=0.60±0.34 h−1) compared to S. pasteurii (kurea=0.07±0.02 h−1, kprecip=0.25±0.02 h−1), though these differences were not statistically significantly different. B. sphaericus 21787 showed little ureolytic activity but was still capable of inducing some CaCO3 precipitation. Cell growth appeared to be inhibited during the period of CaCO3 precipitation. Transmission electron microscopy (TEM) images suggest this is due to the encasement of cells and was reflected in lower kurea values observed in the presence of dissolved Ca. However, biomass regrowth could be observed after CaCO3 precipitation ceased, which suggests that ureolysis-induced CaCO3 precipitation is not necessarily lethal for the entire population. The kinetics of ureolysis and CaCO3 precipitation with S. pasteurii was further analyzed under anaerobic conditions. Rate coefficients obtained in anaerobic environments were comparable to those under aerobic conditions; however, no cell growth was observed under anaerobic conditions with NO−3, SO2−4 or Fe3+ as potential terminal electron acceptors. These data suggest that the initial rates of ureolysis and ureolysis-induced CaCO3 precipitation are not significantly affected by the absence of oxygen but that long-term ureolytic activity might require the addition of suitable electron acceptors. Variations in the ureolytic capabilities and associated rates of CaCO3 precipitation between strains must be fully considered in subsurface engineering strategies that utilize microbial amendments.
  • Thumbnail Image
    Item
    Detection of Pathogenic and Non-pathogenic Bacteria in Drinking Water and Associated Biofilms on the Crow Reservation, Montana, USA
    (2018-07) Richards, Crystal L.; Broadaway, Susan C.; Eggers, Margaret J.; Doyle, John T.; Pyle, Barry H.; Camper, Anne K.; Ford, Tim E.
    Private residences in rural areas with water systems that are not adequately regulated, monitored, and updated could have drinking water that poses a health risk. To investigate water quality on the Crow Reservation in Montana, water and biofilm samples were collected from 57 public buildings and private residences served by either treated municipal or individual groundwater well systems. Bacteriological quality was assessed including detection of fecal coliform bacteria and heterotrophic plate count (HPC) as well as three potentially pathogenic bacterial genera, Mycobacterium, Legionella, and Helicobacter. All three target genera were detected in drinking water systems on the Crow Reservation. Species detected included the opportunistic and frank pathogens Mycobacterium avium, Mycobacterium gordonae, Mycobacterium flavescens, Legionella pneumophila, and Helicobacter pylori. Additionally, there was an association between HPC bacteria and the presence of Mycobacterium and Legionella but not the presence of Helicobacter. This research has shown that groundwater and municipal drinking water systems on the Crow Reservation can harbor potential bacterial pathogens.
Copyright (c) 2002-2022, LYRASIS. All rights reserved.