Center for Biofilm Engineering (CBE)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/9334
At the Center for Biofilm Engineering (CBE), multidisciplinary research teams develop beneficial uses for microbial biofilms and find solutions to industrially relevant biofilm problems. The CBE was established at Montana State University, Bozeman, in 1990 as a National Science Foundation Engineering Research Center. As part of the MSU College of Engineering, the CBE gives students a chance to get a head start on their careers by working on research teams led by world-recognized leaders in the biofilm field.
Browse
5 results
Search Results
Item Interactions of microorganisms within a urinary catheter polymicrobial biofilm model(Wiley, 2022-09) Allkja, Jontana; Goeres, Darla M.; Azevedo, Andreia S.; Azevedo, Nuno F.Biofilms are often polymicrobial in nature, which can impact their behavior and overall structure, often resulting in an increase in biomass and enhanced antimicrobial resistance. Using plate counts and locked nucleic acid/2′-O-methyl-RNA fluorescence in situ hybridization (LNA/2′OMe-FISH), we studied the interactions of four species commonly associated with catheter-associated urinary tract infections (CAUTI): Enterococcus faecalis, Escherichia coli, Candida albicans, and Proteus mirabilis. Eleven combinations of biofilms were grown on silicone coupons placed in 24-well plates for 24 h, 37°C, in artificial urine medium (AUM). Results showed that P. mirabilis was the dominant species and was able to inhibit both E. coli and C. albicans growth. In the absence of P. mirabilis, an antagonistic relationship between E. coli and C. albicans was observed, with the former being dominant. E. faecalis growth was not affected in any combination, showing a more mutualistic relationship with the other species. Imaging results correlated with the plate count data and provided visual verification of species undetected using the viable plate count. Moreover, the three bacterial species showed overall good repeatability SD (Sr) values (0.1–0.54) in all combinations tested, whereas C. albicans had higher repeatability Sr values (0.36–1.18). The study showed the complexity of early-stage interactions in polymicrobial biofilms. These interactions could serve as a starting point when considering targets for preventing or treating CAUTI biofilms containing these species.Item Biofilms vs. cities and humans vs. aliens – a tale of reproducibility in biofilms(Elsevier BV, 2021-06) Azevedo, Nuno F.; Allkja, Jontana; Goeres, Darla M.In recent decades the scientific community has started to appreciate that most microorganisms live in complex 3D structures composed of cells, polysaccharides, and other components such as proteins, extracellular (e)DNA, and lipids. These structures are commonly designated 'biofilms'. Similar to other areas of research, biofilm studies have been affected by a lack of reproducibility. In this article, we propose a new scheme on how to classify the level of reproducibility in biofilms. This consists of four different levels: level 1, no reproducibility; level 2, standard reproducibility; level 3, potential standard reproducibility; and level 4, total reproducibility. Some methods aim to improve reproducibility by focusing on biofilm growth reactors, while others focus on biofilm characterization methods. Moreover, initiatives such as minimum information guidelines and biofilm-centered databases offer alternative strategies to tackle the reproducibility problem. The path to total reproducibility is certainly complex, but novel experimental and computational strategies are bringing us closer to achieving this goal.Item Minimum information guideline for spectrophotometric and fluorometric methods to assess biofilm formation in microplates(Elsevier BV, 2020) Allkja, Jontana; Bjarnsholt, Thomas; Coenye, Tom; Cos, Paul; Fallarero, Adyary; Harrison, Joe J.; Lopes, Susana P.; Oliver, Antonio; Pereira, Maria Olivia; Ramage, Gordon; Shirtliff, Mark E.; Stoodley, Paul; Webb, Jeremy S.; Zaat, Sebastian A.J.; Goeres, Darla M.; Azevedo, Nuno FilipeThe lack of reproducibility of published studies is one of the major issues facing the scientific community, and the field of biofilm microbiology has been no exception. One effective strategy against this multifaceted problem is the use of minimum information guidelines. This strategy provides a guide for authors and reviewers on the necessary information that a manuscript should include for the experiments in a study to be clearly interpreted and independently reproduced. As a result of several discussions between international groups working in the area of biofilms, we present a guideline for the spectrophotometric and fluorometric assessment of biofilm formation in microplates. This guideline has been divided into 5 main sections, each presenting a comprehensive set of recommendations. The intention of the minimum information guideline is to improve the quality of scientific communication that will augment interlaboratory reproducibility in biofilm microplate assays.Item Minimum information guideline for spectrophotometric and fluorometric methods to assess biofilm formation in microplates(2020-12) Allkja, Jontana; Bjarnsholt, Thomas; Coenye, Tom; Cos, Paul; Fallarero, Adyary; Harrison, Joe J.; Lopes, Susana P.; Oliver, Antonio; Pereira, Maria Olivia; Ramage, Gordon; Shirtliff, Mark E.; Stoodley, Paul; Webb, Jeremy S.; Zaat, Sebastian A. J.; Goeres, Darla M.; Azevedo, Nuno FilipeThe lack of reproducibility of published studies is one of the major issues facing the scientific community, and the field of biofilm microbiology has been no exception. One effective strategy against this multifaceted problem is the use of minimum information guidelines. This strategy provides a guide for authors and reviewers on the necessary information that a manuscript should include for the experiments in a study to be clearly interpreted and independently reproduced. As a result of several discussions between international groups working in the area of biofilms, we present a guideline for the spectrophotometric and fluorometric assessment of biofilm formation in microplates. This guideline has been divided into 5 main sections, each presenting a comprehensive set of recommendations. The intention of the minimum information guideline is to improve the quality of scientific communication that will augment interlaboratory reproducibility in biofilm microplate assays.Item Interlaboratory study for the evaluation of three microtiter plate-based biofilm quantification methods(2021-07) Allkja, Jontana; van Charante, Frits; Aizawa, Juliana; Reigada, Ines; Guarch-Perez, Clara; Vazquez-Rodriguez, Jesus Augusto; Cos, Paul; Coenye, Tom; Fallarero, Adyary; Zaat, Sebastian A. J.; Felici, Antonio; Ferrari, Livia; Azevado, Nuno F.; Parker, Albert E.; Goeres, Darla M.Microtiter plate methods are commonly used for biofilm assessment. However, results obtained with these methods have often been difficult to reproduce. Hence, it is important to obtain a better understanding of the repeatability and reproducibility of these methods. An interlaboratory study was performed in five different laboratories to evaluate the reproducibility and responsiveness of three methods to quantify Staphylococcus aureus biofilm formation in 96-well microtiter plates: crystal violet, resazurin, and plate counts. An inter-lab protocol was developed for the study. The protocol was separated into three steps: biofilm growth, biofilm challenge, biofilm assessment. For control experiments participants performed the growth and assessment steps only. For treatment experiments, all three steps were performed and the efficacy of sodium hypochlorite (NaOCl) in killing S. aureus biofilms was evaluated. In control experiments, on the log10-scale, the reproducibility SD (SR) was 0.44 for crystal violet, 0.53 for resazurin, and 0.92 for the plate counts. In the treatment experiments, plate counts had the best responsiveness to different levels of efficacy and also the best reproducibility with respect to responsiveness (Slope/SR = 1.02), making it the more reliable method to use in an antimicrobial efficacy test. This study showed that the microtiter plate is a versatile and easy-to-use biofilm reactor, which exhibits good repeatability and reproducibility for different types of assessment methods, as long as a suitable experimental design and statistical analysis is applied.