Center for Biofilm Engineering (CBE)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/9334
At the Center for Biofilm Engineering (CBE), multidisciplinary research teams develop beneficial uses for microbial biofilms and find solutions to industrially relevant biofilm problems. The CBE was established at Montana State University, Bozeman, in 1990 as a National Science Foundation Engineering Research Center. As part of the MSU College of Engineering, the CBE gives students a chance to get a head start on their careers by working on research teams led by world-recognized leaders in the biofilm field.
Browse
5 results
Search Results
Item Magnetic resonance analysis of capillary formation reaction front dynamics in alginate gels(2011-09) Maneval, James E.; Bernin, D.; Fabich, H. T.; Seymour, Joseph D.; Codd, Sarah L.The formation of heterogeneous structures in biopolymer gels is of current interest for biomedical applications and is of fundamental interest to understanding the molecular level origins of structures generated from disordered solutions by reactions. The cation-mediated physical gelation of alginate by calcium and copper is analyzed using magnetic resonance measurements of spatially resolved molecular dynamics during gel front propagation. Relaxation time and pulse-field gradient methods are applied to determine the impact of ion front motion on molecular translational dynamics. The formation of capillaries in alginate copper gels is correlated to changes in translational dynamics.Item Nuclear magnetic resonance measurement of hydrodynamic dispersion in porous media: Preasymptotic dynamics, structure and nonequilibrium statistical mechanics(2012-10) Codd, Sarah L.; Seymour, Joseph D.Measurement of displacement time and length scale dependent dynamics by pulsed gradient spin echo nuclear magnetic resonance in porous media directly provides the preasymptotic hydrodynamic dispersion coefficient. This allows for comparison with nonequilibrium statistical mechanics models of hydrodynamics dispersion in porous media. Preasymptotic dispersion data and models provide characterization of porous media structure length scales relevant to transport and are related to the permeability and sample heterogeneity.Item Biofilm detection in natural unconsolidated porous media using a low-field magnetic resonance system(2013-04) Sanderlin, A. B.; Vogt, Sarah J.; Grunewald, E.; Bergin, B. A.; Codd, Sarah L.The extent to which T2 relaxation measurements can be used to determine biofouling in several natural geological sand media using a low-field (275 kHz, 6.5 mT) NMR system has been demonstrated. It has been previously shown that, at high laboratory strength fields (300 MHz, 7 T), T2 techniques can be used as a bioassay to confirm the growth of biofilm inside opaque porous media with low magnetic susceptibilities such as borosilicate or soda lime glass beads. Additionally decreases in T2 can be associated with intact biofilm as opposed to degraded biofilm material. However, in natural geological media, the strong susceptibility gradients generated at high fields dominated the T2 relaxation time distributions and biofilm growth could not be reliably detected. Samples studied included Bacillus mojavensis biofilm in several sand types, as well as alginate solution and alginate gel in several sand types. One of the sand types was highly magnetic. Data was collected with a low-field (275 kHz, 6.5 mT) benchtop NMR system using a CPMG sequence with an echo time of 1.25 ms providing the ability to detect signals with T2 greater than 1 ms. Data presented here clearly demonstrate that biofilm can be reliably detected and monitored in highly magnetically susceptible geological samples using a low-field NMR spectrometer indicating that low-field NMR could be viable as a biofilm sensor at bioremedation sites.Item Permeability of a growing biofilm in a porous media fluid flow analyzed by magnetic resonance displacement-relaxation correlations(2013-05) Vogt, Sarah J.; Sanderlin, A. B.; Seymour, Joseph D.; Codd, Sarah L.Biofilm growth in porous media is difficult to study non-invasively due to the opaqueness and heterogeneity of the systems. Magnetic resonance is utilized to non-invasively study water dynamics within porous media. Displacement-relaxation correlation experiments were performed on fluid flow during biofilm growth in a model porous media of mono-dispersed polystyrene beads. The spin–spin T2 magnetic relaxation distinguishes between the biofilm phase and bulk fluid phase due to water–biopolymer interactions present in the biofilm, and the flow dynamics are measured using PGSE NMR experiments. By correlating these two measurements, the effects of biofilm growth on the fluid dynamics can be separated into a detailed analysis of both the biofilm phase and the fluid phase simultaneously within the same experiment. Within the displacement resolution of these experiments, no convective flow was measured through the biomass. An increased amount of longitudinal hydrodynamic dispersion indicates increased hydrodynamic mixing due to fluid channeling caused by biofilm growth. The effect of different biofilm growth conditions was measured by varying the strength of the bacterial growth medium.Item Magnetic resonance measurements of flow-path enhancement during supercritical CO2 injection in sandstone and carbonate rock cores(2014-10) Vogt, Sarah J.; Shaw, Colin A.; Maneval, James E.; Brox, Timothy I.; Skidmore, Mark L.; Codd, Sarah L.; Seymour, Joseph D.Sandstone and carbonate core samples were challenged with a two-phase supercritical CO2 and brine mixture to investigate the effects of chemical processes on the physical properties of these rocks during injection of CO2. The experiments were monitored in real-time for pressure, temperature, and volumetric rate discharge. Pore geometry and connectivity were characterized before and after each experimental challenge using magnetic resonance (MR) imaging and two-dimensional MR relaxation correlations. Quartz arenite sandstone cores were largely unaffected by the challenge with no measurable change in effective permeability at moderate and high temperatures (~50 °C and ~95 °C) or brine concentrations (~1 g/L and ~10 g/L). In contrast, a carbonate core sample showed evidence of significant dissolution leading to a six-fold increase in effective permeability. MR images and relaxation measurements revealed a marked increase in the volume and connectivity of pre-existing pore networks in the carbonate core. We infer that the increase in permeability in the carbonate core was enhanced by focused dissolution in the existing pore and fracture networks that enhanced fast-flow paths through the core.