Center for Biofilm Engineering (CBE)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/9334
At the Center for Biofilm Engineering (CBE), multidisciplinary research teams develop beneficial uses for microbial biofilms and find solutions to industrially relevant biofilm problems. The CBE was established at Montana State University, Bozeman, in 1990 as a National Science Foundation Engineering Research Center. As part of the MSU College of Engineering, the CBE gives students a chance to get a head start on their careers by working on research teams led by world-recognized leaders in the biofilm field.
Browse
11 results
Search Results
Item Sulfide product inhibition of desulfovibrio desulfuricans in batch and continuous cultures(1995-02) Okabe, Satoshi; Nielsen, P. H.; Jones, Warren L.; Characklis, William G.Sulfide product inhibition kinetics for growth and activity of Desulfovibrio desulfuricans was investigated in batch and continuous cultures at pH = 7.0. A non-competitive inhibition model adequately described sulfide product inhibition kinetics. Inhibition coefficient (Ki) for maximum specific growth rate (μinhmax) was 251 mg l−1 S in a batch experiment. Cell yield determined in a chemostat was reduced in half by a sulfide concentration of about 250 mg l−1 S, which was very close to the Ki value for the batch growth. Maximum specific growth rate (μinhmax) and cell yield (YcLac) were strongly inhibited by high levels of sulfide concentrations, whereas specific lactate utilization rate increased with increasing sulfide concentrations. The results indicated an increase in the relative energy needed for maintenance to overcome sulfide inhibition and uncoupling growth from energy production. However, D. desulfuricans to some extent could recover from the shock of high sulfide concentrations. Stoichiometry for catabolic reactions (energy producing) did not change at high sulfide concentrations, while anabolic reactions (cellular synthesis) were strongly inhibited by high sulfide concentrations. These results suggested that separation of sulfide product inhibition into growth (cell yield) and activity (substrate utilization rate) was important to incorporate the sulfide product inhibition kinetics in a variety of applications.Item Kinetic analysis of microbial sulfate reduction by desulfovibrio desulfuricans in an anaerobic upflow porous media biofilm reactor(1994-02) Chen, Ching-I; Mueller, Robert Franz; Griebe, ThomasAn anaerobic upflow porous media biofilm reactor was designed to study the kinetics and stoichiometry of hydrogen sulfide production by the sulfate-reducing bacterium (SRB) Desulfovibrio desulfuricans (ATCC 5575) as the first step for the modeling and control of formation souring (H2S) in oil field porous media. The reactor was a packed bed (50 × 5.5 cm) tubular reactor. Sea sand (140 to 375 μm) was used as the porous media. The initial indication of souring was the appearance of well-separated black spots (precipitates of iron sulfide) in the sand bed. The blackened zones expanded radially and upward through the column. New spots also appeared and expanded into the cone shapes. Lactate (substrate) was depleted and hydrogen sulfide appeared in the effluent. Analysis of the pseudo–steady state column shows that there were concentration gradients for lactate and hydrogen sulfide along the column. The results indicate that most of the lactate was consumed at the front part of the column. Measurements of SRB biomass on the solid phase (sand) and in the liquid phase indicate that the maximum concentration of SRB biomass resided at the front part of the column while the maximum in the liquid phase occurred further downstream. The stoichiometry regarding lactate consumption and hydrogen sulfide production observed in the porous media reactor was different from that in a chemostat. After analyzing the radial dispersion coefficient for the SRB in porous media and kinetics of microbial growth, it was deduced that transport phenomena dominate the souring process in our porous media reactor system.Item Modeling urban runoff from a planned community(1976-04) Diniz, E. V.; Holloway, David; Characklis, William G.Item Biofilms, biomaterials and device-related infections(2004) Costerton, J. William; Stoodley, Paul; Shirtliff, Mark E.; Pasmore, M.; Cook, Guy S.Item Biocorrosion(2000) Geesey, Gill G.; Beech, Iwona; Bremer, Philip J.; Webster, Barbara J.; Wells, D. BretItem Uranium immobilization by sulfate-reducing biofilms(2004-04) Beyenal, Haluk; Sani, Rajesh K.; Peyton, Brent M.; Dohnalkova, Alice; Amonette, James E.; Lewandowski, ZbigniewHexavalent uranium [U(VI)] was immobilized using biofilms of the sulfate-reducing bacterium (SRB) Desulfovibrio desulfuricans G20. The biofilms were grown in flat-plate continuous-flow reactors using lactate as the electron donor and sulfate as the electron acceptor. U(VI)was continuously fed into the reactor for 32 weeks at a concentration of 126 microM. During this time, the soluble U(VI) was removed (between 88 and 96% of feed) from solution and immobilized in the biofilms. The dynamics of U immobilization in the sulfate-reducing biofilms were quantified by estimating: (1) microbial activity in the SRB biofilm, defined as the hydrogen sulfide (H2S) production rate and estimated from the H2S concentration profiles measured using microelectrodes across the biofilms; (2) concentration of dissolved U in the solution; and (3) the mass of U precipitated in the biofilm. Results suggest that U was immobilized in the biofilms as a result of two processes: (1) enzymatically and (2) chemically, by reacting with microbially generated H2S. Visual inspection showed that the dissolved sulfide species reacted with U(VI) to produce a black precipitate. Synchrotron-based U L3-edge X-ray absorption near edge structure (XANES) spectroscopy analysis of U precipitated abiotically by sodium sulfide indicated that U(VI) had been reduced to U(IV). Selected-area electron diffraction pattern and crystallographic analysis of transmission electron microscope lattice-fringe images confirmed the structure of precipitated U as being that of uraninite.Item Resolving biogeochemical phenomena at high spatial resolution through electron microscopy(2008-06) Geesey, Gill G.; Borch, Thomas; Reardon, Catherine L.Our understanding of microbe-metal interactions has advanced dramatically since the mid-1970s when little was known about the reactivity of bacterial cell wall components toward metal ions in the extracellular milieu. Although certain metals such as and Pb+ were known to react with components of bacterial cell walls and used to visualize their structure by electron microscopy (Garland et al., 1975), little physicochemical data were available on the specificity and sites of interactions (Humphrey & Vincent, 1966; Heptinstall et al., 1970; Irvin et al., 1975; Lambert et al., 1975; Raymond & MacLeod, 1975). Furthermore, there were no model systems to explorethe mechanisms of these interactions. This began to change when Beveridge and Murray used isolated cell walls of Bacillus subtilis to quantify metal ion binding to wall components. Beveridge demonstrated that cell walls concentrated cations such as Mg++, Na+, K+, Cu++ and Fe+++, but not Ba++, Li+ or Al+++ (Beveridge & Murray, 1976). Since these initial studies, Beveridge and his students and collaborators have contributed greatly to our understanding of the complex interactions between microbial cell surface polymers and metals in the environment. As fellow scientists working in this research area, we have developed a deep admiration of Beveridge’s scientific insight, technical skills and collegial demeanor. Not surprisingly, Beveridge’s research has had a significant impact on our research, as well as on the research of our collaborators and colleagues, and will likely influence the work of future generations of scientists working in the field of geobiology. Some examples are cited below.Item Measurements of accumulation and displacement at the single cell cluster level in Pseudomonas aeruginosa biofilms(2008-09) Klayman, Benjamin J.; Klapper, Isaac; Stewart, Philip S.; Camper, Anne K.Quantitative descriptions of biofilm growth and dynamics at the individual cell level are largely missing from the literature. To fill this gap, research was done to describe growth, accumulation and displacement patterns in developing Pseudomonas aeruginosa biofilms. A parent strain of PAO1 was labelled with either a cyan or yellow fluorescent protein. These were then grown in a flow cell biofilm together so that pockets of dividing cells could be identified and their accumulation and displacement tracked. This analysis revealed a pattern of exponential accumulation for all clusters followed by a stationary accumulation phase. A background ‘carpet’ layer of cells uniformly colonizing the surface exhibited zero net accumulation of bio-volume. The individual clusters were found to have a mean accumulation rate of 0.34 h-1 with a range of 0.28–0.41 h-1. Cluster accumulation rates were negatively correlated with cluster size; larger clusters accumulated volume at a slower rate (P < 0.001). Pockets of cells on the inside of clusters initially accumulated at a comparable rate to the cluster within which they resided, but later invariably exhibited zero to slightly negative accumulation despite continued exponential (positive) accumulation of the cluster. Expanding clusters were able to displace neighbouring cells from the surface, and larger clusters displaced smaller clusters. This work provides a more detailed quantitative experimental observation of biofilm behaviour than has been described previously.Item Enhanced mobility of pb in the presence of dissolved natural organic matter(1997-12) Jordan, Ryan N.; Yonge, David R.; Hathhorn, Wade E.The speciation of Pb in batch experiments and its mobility under flowing conditions in column transport experiments were investigated to study Pb behavior in a soil-water system in the presence of dissolved natural organic matter (DOM), peat humic acid (PHA) and peat fulvic acid (PFA). A sandy soil having a significant intraparticle porosity was used as the sorbing media. Batch equilibrium sorption isotherms for single components (Pb, PHA, and PFA) and for Pb in the presence of PHA and PFA were generated. Batch equilibrium experiments were also performed for both PHA and PFA to investigate Pb-DOM binding in the absence of soil. Single component (Pb, PHA, and PFA) and multicomponent (Pb-PHA and Pb-PFA) laboratory-scale column transport experiments were conducted to assess transport behavior of Pb in the presence of DOM. Sorption isotherms indicated that the soil had a higher affinity for PHA than for PFA. However, single component column transport experiments showed that PHA was less retarded than PFA. This anomaly was attributed to the size exclusion of the larger PHA molecules from the intraparticle porosity of the media under the geochemical conditions in the column. Pb retardation predicted by equilibrium equations based upon nonlinear isotherm parameterization agreed well with observed retardation. However, equilibrium retardation equations overpredicted retardation of DOM, indicating sorption kinetic limitations (chemical and/or physical nonequilibrium), molecular size exclusion during column transport, or chemical heterogeneity of the DOM. In multicomponent column transport experiments, Pb retardation decreased by factors of 4–8 in the presence of DOM. Multicomponent batch equilibrium experiments suggested that Pb mobility was governed by speciation of Pb with soluble DOM during transport. Thus, Pb eluted earlier in the presence of PHA than in the presence of PFA because PHA had a higher affinity for Pb binding than PFA.Item A biofilm growth protocol and the design of a magnetic field exposure setup to be used in the study of magnetic fields as a means of controlling bacterial biofilms(2009-07) McLeod, Bruce R.; Sandvik, Elizabeth L.The use of prosthetic implants is increasing both in the United States and around the world and there is a concomitant rise in cases of biofilm-based, persistent infections that are quite serious and virtually impervious to antibiotic treatment. The development of alternate therapies that do not involve long term use of high levels of antibiotics or surgical intervention is needed. Based on the success of using electric or magnetic fields to alter certain physiological processes, it is hypothesized that relatively low level magnetic fields, in conjunction with the appropriate antibiotic, may be able to help control and eventually clear bacterial biofilms on a prosthetic. In order to test this hypothesis, it is necessary to first develop a means of growing laboratory grade biofilms on specific materials in a way that is repeatable between experiments and that can be reproduced by other laboratories. Secondly, a means of applying controlled magnetic fields to the surfaces supporting the biofilms at a defined temperature must be developed. This article addresses both of these points.