Biochar as a Renewable Substitute for Carbon Black in Lithium-Ion Battery Electrodes

dc.contributor.authorKane, Seth
dc.contributor.authorStorer, Aksiin
dc.contributor.authorXu, Wei
dc.contributor.authorRyan, Cecily
dc.contributor.authorStadie, Nicholas P.
dc.date.accessioned2022-12-12T21:29:31Z
dc.date.available2022-12-12T21:29:31Z
dc.date.issued2022-09
dc.descriptionThis document is the unedited Author’s version of a Submitted Work that was subsequently accepted for publication in ACS Sustainable Chemistry & Engineering, copyright © American Chemical Society after peer review. To access the final edited and published work see https://doi.org/10.1021/acssuschemeng.2c02974en_US
dc.description.abstractLignin-derived biochar was prepared and characterized towards potential applications as a conductive electrode additive and active lithium host material within lithium-ion batteries (LIBs). This biochar was specifically selected for its high electrical conductivity, which is comparable to that of common conductive carbon black standards (e.g., Super P). Owing to its high electrical conductivity, this biochar serves as an effective conductive additive within electrodes comprised of graphite as the active material, demonstrating slightly improved cell efficiency and rate capability over electrodes using carbon black as the additive. Despite its effectiveness as a conductive additive in LIB anodes, preliminary results show that the biochar developed in this work is not suitable as a direct replacement for carbon black as a conductive additive in LiFePO4 (LFP) cathodes. This latter insufficiency may be due to differences in particle 2 geometry between biochar and carbon black; further optimization is necessary to permit the application of biochar as a general-purpose conductive additive in LIBs. Nevertheless, these investigations combined with an assessment of greenhouse gas emissions from biochar production show that replacing carbon black with biochar can be an effective method to improve the sustainability of LIBs.en_US
dc.identifier.citationKane, S., Storer, A., Xu, W., Ryan, C., & Stadie, N. P. (2022). Biochar as a Renewable Substitute for Carbon Black in Lithium-Ion Battery Electrodes. ACS Sustainable Chemistry & Engineering, 10(37), 12226-12233.en_US
dc.identifier.issn2168-0485
dc.identifier.urihttps://scholarworks.montana.edu/handle/1/17511
dc.language.isoen_USen_US
dc.publisherAmerican Chemical Societyen_US
dc.rightscopyright American Chemical Society 2022en_US
dc.rights.urihttp://web.archive.org/web/20190502075603/http://pubs.acs.org/paragonplus/copyright/jpa_form_a.pdfen_US
dc.subjectElectrical conductivityen_US
dc.subjectgraphitic carbonen_US
dc.subjectlignin-deriveden_US
dc.subjectbiocarbonen_US
dc.subjectanodeen_US
dc.subjectcathodeen_US
dc.subjectelectrochemical energy storageen_US
dc.subjectconductive additiveen_US
dc.titleBiochar as a Renewable Substitute for Carbon Black in Lithium-Ion Battery Electrodesen_US
dc.typeArticleen_US
mus.citation.extentfirstpage1en_US
mus.citation.extentlastpage27en_US
mus.citation.issue37en_US
mus.citation.journaltitleACS Sustainable Chemistry & Engineeringen_US
mus.citation.volume10en_US
mus.identifier.doi10.1021/acssuschemeng.2c02974en_US
mus.relation.collegeCollege of Engineeringen_US
mus.relation.departmentMechanical & Industrial Engineering.en_US
mus.relation.universityMontana State University - Bozemanen_US

Files

Original bundle

Now showing 1 - 1 of 1
Thumbnail Image
Name:
kane-battery-2022.pdf
Size:
1.04 MB
Format:
Adobe Portable Document Format
Description:
lithium ion battery electrodes

License bundle

Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Copyright (c) 2002-2022, LYRASIS. All rights reserved.