Effect of Fines Content on Calcium Carbonate Precipitation and Thermal Properties of Biocemented Sand

Abstract

In this study, the impacts to soil thermal properties during and after biocementation via microbially induced calcite precipitation (MICP) method on silty silica sand specimens with varying fines content (0%, 5%, and 15%) were investigated. Firstly, calcium conversion was measured after each pulse; then, the MICP-treated specimens were tested for cementation uniformity. The evolution of thermal conductivity of silty soils with the MICP treatment was assessed using a thermocouple probe. The results show that thermal conductivity of silty saturated sands increased by 17% for specimens treated to 9.7% CaCO3. The improvement in thermal conductivity was attributed to the formation of calcium carbonate bridges binding the soil grains together. The results suggested that the thermal conductivity of silty soil depends on water content, the number of treatment pulses, and the treatment uniformity through the soil specimen. Presence of fines content in the soil was found to play an important role in the distribution and uniformity of biocementation through the soil specimen. However, no statistically significant difference in the thermal conductivity values of MICP-treated specimens with different fines content was observed (𝑝>0.05). The average calcium carbonate content ranged between 10.7% and 7.2% for the soils with 0% and 15% fines content, respectively. The findings of this research could be used to improve the efficiency of geothermal boreholes and other energy geostructures using MICP by improving thermal conductivity of dry and partially saturated soil.