Scholarly Work - Civil Engineering
Permanent URI for this collectionhttps://scholarworks.montana.edu/handle/1/3460
Browse
18 results
Search Results
Item Practical Guidelines for Estimation of Rest Area Use on Rural Interstates and Arterial Highways(2012-01) Al-Kaisy, Ahmed; Veneziano, David; Kirkemo, Zachary S.; Dorrington, ChristopherRest areas perform a critical role in the highway network. These areas provide passenger vehicle occupants and heavy vehicle operators with an opportunity to use a restroom, walk around, stop for a meal, sleep for a period of time, or even pause to use a cellular phone. These activities also have a direct impact on the various aspects of rest area planning and design. Existing guidance for rest area planning and design is largely based on national trends, which may not represent patterns of use in rural states. This paper presents a series of practical guidelines that may be used in the design and rehabilitation of rest area facilities, particularly those in rural areas. The guidance was developed by the use of empirical observations of rest area use at 44 study sites in the state of Montana. Given the amount of data collected and used in this research, it is reasonable to expect that the guidelines developed are representative of a significant proportion of existing and future rest area sites in rural locales. However, each rest area is different, and careful consideration should be given when the guidelines outlined in this paper are used.Item Remote Sensing of Weather and Road Surface Conditions(2013-01) Ewan, Levi A.; Al-Kaisy, Ahmed; Veneziano, DavidAdvances in road weather sensing technologies have made noninvasive road weather sensors a valuable component in many intelligent transportation systems (ITS) applications. This study investigates the reliability of using such a sensor for a proposed weather-responsive variable speed limit system. The Vaisala surface state and temperature sensors (DSC-111 and DST-111) were selected for the proposed application. The sensors' ability to provide accurate and reliable data was tested under various conditions in a controlled laboratory environment. Specifically, four outputs of interest from the sensors were tested in this investigation: surface state, snow and ice depth, water depth, and grip level. Testing results showed that the sensors determined the surface state (dry, moist, wet, snowy, and icy) accurately and reliably. The sensors' snow depth readings were found to be inaccurate, while the sensors' ice depth measurements were found to be relatively close to the actual depths. For water depth, only a limited number of readings were close to the actual depths, while other readings were highly inaccurate. In an effort to test the potential of the sensor in providing reliable inputs to the proposed ITS application, a calibration was conducted for the sensor water depth measurements at various water depths and sensor installation angles. Calibration results showed that the water depth could be accurately estimated with the calibrated sensor measurements, regardless of water depth or sensor installation angle. Sensor estimates of grip level were found to be highly correlated to the coefficient of static friction for the conditions considered in this study.Item Perceived Risk of Phoning While Driving: A Case Study from Jordan(2015-10) Ismeik, Muhannad; Al-Kaisy, Ahmed; Al-Ansari, KhalidThe use of mobile phones while driving is banned in most countries since it impairs driving performance and is believed to increase crash risk. The aim of this research is to identify the prevalence of phoning while driving in Jordan and to examine the association between drivers’ perception of risk and potential predicting variables. A sample of 423 drivers was surveyed to gather information on their mobile phone use while driving as well as their risk perception. Data collection took place anonymously at diverse locations through a self-report questionnaire. Statistical analysis was performed to highlight the association between risk levels and drivers’ demographics and exposure characteristics. An alarming rate of 93.1% of drivers, mostly young male college students, engaged in this unsafe behavior despite being aware of the associated risk and legislative laws. Findings suggested gender, employment status, age, education level, driving experience, and daily traveled distance were associated with mobile phone use while driving. Recommendations to enhance traffic safety were proposed and further research directions were highlighted.Item Traffic Safety Along Tourist Routes in Rural Areas(2016-01) Wang, Yiyi; Veneziano, David; Russell, Sam; Al-Kaisy, AhmedLittle is known about the safety of tourist drivers in the United States. Most domestic studies have focused on traffic deaths and injuries of U.S. citizens traveling abroad and cite factors such as driving on the left, lack of seat belt use, and alcohol consumption. U.S. states that have a number of tourist attractions and the roadways to reach them may be interested in whether traffic safety is problematic for drivers who are tourists. To that end, this research investigated the contributing factors for crash severity and crash likelihood of visiting drivers in or near three national parks in rural areas. Driver-level data from the Rocky Mountain National Park in Colorado and the Sequoia and Kings Canyon National Parks in California revealed risk factors for crash severity, including age, geometry, and seat belt use. The second data set offered a more microscopic view at the road level and was used to anticipate crash frequency of visiting drivers at the road link level. Moreover, the second data set contained road geometry, traffic volume, environment, and crash counts aggregated at the segment level along a 57.8-mi stretch of U.S. Hwy 89 (a primary route to the north gate of Yellowstone National Park) in Montana that is frequently used by tourists. Crash risk factors (e.g., geometry and traffic intensity) affected local and nonlocal (tourist) drivers in different ways. Further exploration of crash trends in specific parks would be valuable in understanding the overall trends and contributors to crashes in tourism areas and to determine effective improvement measures.Item Safety Effects of Road Geometry and Roadside Features on Low-Volume Roads in Oregon(2016-01) Ewan, Levi A.; Al-Kaisy, Ahmed; Hossain, FahmidCrashes are random events and can occur at any location along a roadway. On roadways with high traffic volumes, the more frequent occurrence of crashes permits the direct identification of high-frequency crash locations with the use of historical data. On low-volume roads, crash occurrence, particularly the occurrence of crashes with fatal and serious injuries, is less frequent. There is a need to understand better the risks associated with geometric and roadside features along low-volume roadways in order to identify locations where preventive countermeasures may be employed. This paper describes the collection and analysis of a large sample of data from low-volume roads in Oregon to quantify the effects of geometric and roadside features on crash occurrence and associated risks. The effects of lane width, shoulder width, grade, side slope, fixed objects near the roadway, and horizontal and vertical curves have been quantified. For the low-volume road sample, roads with lanes less than 12 ft wide have a much higher crash risk than do roads with standard 12-ft lanes. Similarly, roads with narrow or no shoulders tend to have much higher crash rates than roads with shoulders 4 ft or 5 ft wide. Crash risk is shown to be much higher on curves with higher degrees of curvature compared with curves with smaller degrees of curvature.Item Measuring Performance on Two-Lane Highways: Empirical Investigation(2017-01) Al-Kaisy, Ahmed; Jafari, Amirhossein; Washburn, ScottThis paper presents an empirical investigation into several performance measures for operational analysis on two-lane highways. The performance measures investigated are average travel speed, average travel speed to free-flow speed, percent followers, followers flow, followers density, percent impeded, impeded flow, and impeded density. Field data from 16 study sites in the states of Montana, Idaho, Oregon, and North Carolina representing Class 1, Class 2, and Class 3 highways were used in this study. The level of association between performance measures and some of the most important traffic variables was examined with graphical and statistical techniques. The traffic variables investigated in this study included combined flow in both directions of travel; proportion of traffic in the direction of travel, called in this study “traffic split”; percentage of heavy vehicles; and speed variance. Study results suggest that speed-related measures have weak associations with traffic variables compared with headway-related measures. Further, compound measures involving headway and traffic flow or density exhibited the highest associations with traffic variables. With regard to two-lane highway type, higher associations are exhibited at Class 1 sites compared with Class 2 and Class 3 sites. Performance measures showed the highest associations with combined flow and traffic split.Item Traffic Operations on Rural Two-Lane Highways: A Review on Performance Measures and Indicators(2018-05) Al-Kaisy, Ahmed; Jafari, Amirhossein; Washburn, Scott; Lutinnen, Tapio; Dowling, RichardTwo- lane highways constitute a large proportion of the highway system in the United States, particularly in rural areas. Performance evaluation on those highways is the basis for planning, upgrade, and improvement programs. Such evaluations are conducted using performance measures that should ideally be correlated to performance determinants on those highways. Unlike other highway facilities, two-lane highway performance is notably affected by the platooning phenomenon, which is believed to be a function of traffic level and passing opportunities. Over the last couple of decades, several studies have addressed performance measures on two-lane highways, and are mainly driven by the reported limitations of the current measures used by the Highway Capacity Manual (HCM). This review aims to summarize the performance measures that have been published in the literature or used in practice both in the United States and abroad. The review starts with an historical overview of the HCM performance measures since its inception in 1950. It then discusses the most important criteria for measures to be more effective in describing performance, before presenting the review results for measures that have been proposed in literature or reported as being used in practice. Finally, a subjective assessment of all performance measures against the set of criteria outlined in the article is presented. The review presented in this paper provides information that is valuable for practitioners and researchers in understating the alternative measures for assessing performance on two-lane highways, and the limitations and merits associated with those measures.Item Performance measures on two-lane highways: Survey of practice(2018-11) Al-Kaisy, Ahmed; Jafari, Amirhossein; Washburn, Scott; Lutinnen, Tapio; Dowling, RichardTwo-lane highways constitute a significant component of the highway system and serve an essential function for the movement of people and goods. The Highway Capacity Manual is primarily used for operational analysis on two lane highways in the U.S. and Canada. As part of a project sponsored by the National Cooperative Highway Research Program for improving two-lane highway operational analysis methodology, a practice survey was conducted to gather information on agency experiences in regards to performance measurement on two-lane highways. The survey was sent to all state Departments of Transportation in the United States and Canada. A total of 35 usable responses were received, representing 25 states and 4 Canadian provinces. This paper summarizes the results of the agency survey and presents the most important findings. Results suggest that the top three criteria for good performance measures are: sensitivity to traffic conditions, sensitivity to road conditions, and relevance to road user perception. Further, agencies identified average travel speed as the most relevant traffic flow aspect to two-lane highway operations. Other performance measures that were found meritorious were volume-to-capacity ratio and flow rate, for class I and class II highways, respectively, versus the latter measures and percent-time-spent-following for class III highways.Item Examining the Effect of Speed and Roadway Geometry on Crash Experience along a Rural Corridor(2014-03) Watson, Donald C.; Al-Kaisy, Ahmed; Anderson, Nathan D.This paper presents a current investigation into crash experience along a 15.7-mile rural corridor in southwest Montana with the aim of better understanding crash causal factors along the corridor. The study utilized ten years of crash data, geometric data, and observed free-flow speed data along the corridor. A systematic approach was used where every tenth of a mile was described in term of the crash experience, speed, alignment, and roadside features. Using bivariate and multivariate statistical analyses, the study investigated the crash experience along the corridor as well as some of the underlying relationships which could explain some of the crash causal factors. Results show a strong association between crash rates and horizontal curvatures even for flat curves that can be negotiated at speeds above the posted speed limit, per the highway design equations. Higher crash rates were also found to be associated with the difference between the observed free-flow speeds and the speed dictated by the curve radius or sight distance as per the design equations. Further, results strongly support the safety benefits of guardrails as evidenced by the lower crash rates and severities. The presence of fixed objects and the steepness of side slopes were also found to have an effect on crash rates and severities.Item Prioritization Scheme for Proposed RWIS Sites: Montana Case Study(2017-08) Al-Kaisy, Ahmed; Ewan, Levi A.A model for prioritization of new proposed environmental sensor station (ESS) sites is developed and presented in this paper. The model assesses the overall merit (OM) of a proposed ESS site as part of a Road Weather Information System (RWIS) using weather, traffic, and safety data among other variables. The purpose of the proposed model is to help in selecting optimum sites for new ESS locations, which is important in guiding RWIS system expansion. Inputs to the OM model include weather index (WI), traffic index (TI), crash index, geographic coverage, and opportunistic factors. The WI at a proposed site is determined using multiple indicators of weather severity and variability. The crash index, another major input to the OM model, incorporates crash rate along the route and the percentage of weather-related crashes over the analysis period. The TI, in turn, reflects the amount of travel on the highway network in the area surrounding the proposed ESS site. The fourth input to the merit model accounts for the ESS existing coverage in the area where the proposed site is located, while the fifth and last input is concerned with the availability and ease of access to power and communications. Model coefficients are represented by weights that reflect the contribution of each input (variable) to the OM of the ESS site. Those weights are user-specified and should be selected to reflect the agency preferences and priorities. The application of the proposed merit model on sample sites in Montana demonstrated the utility of the model in ranking candidate sites using data readily available to highway agencies.