Publications by Colleges and Departments (MSU - Bozeman)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/3
Browse
92 results
Search Results
Item Subsurface hydrocarbon degradation strategies in low- and high-sulfate coal seam communities identified with activity-based metagenomics(Springer Science and Business Media LLC, 2022-02) Schweitzer, Hannah D.; Smith, Heidi J.; Barnhart, Elliott P.; McKay, Luke J.; Gerlach, Robin; Cunningham, Alfred B.; Malmstrom, Rex R.; Goudeau, Danielle; Fields, Matthew W.Environmentally relevant metagenomes and BONCAT-FACS derived translationally active metagenomes from Powder River Basin coal seams were investigated to elucidate potential genes and functional groups involved in hydrocarbon degradation to methane in coal seams with high- and low-sulfate levels. An advanced subsurface environmental sampler allowed the establishment of coal-associated microbial communities under in situ conditions for metagenomic analyses from environmental and translationally active populations. Metagenomic sequencing demonstrated that biosurfactants, aerobic dioxygenases, and anaerobic phenol degradation pathways were present in active populations across the sampled coal seams. In particular, results suggested the importance of anaerobic degradation pathways under high-sulfate conditions with an emphasis on fumarate addition. Under low-sulfate conditions, a mixture of both aerobic and anaerobic pathways was observed but with a predominance of aerobic dioxygenases. The putative low-molecular-weight biosurfactant, lichysein, appeared to play a more important role compared to rhamnolipids. The methods used in this study—subsurface environmental samplers in combination with metagenomic sequencing of both total and translationally active metagenomes—offer a deeper and environmentally relevant perspective on community genetic potential from coal seams poised at different redox conditions broadening the understanding of degradation strategies for subsurface carbon.Item In Situ Enhancement and Isotopic Labeling of Biogenic Coalbed Methane(American Chemical Society, 2022-02) Barnhart, Elliott P.; Ruppert, Leslie; Hiebert, Randy; Smith, Heidi J.; Schweitzer, Hannah D.; Clark, Arthur C.; Weeks, Edwin P.; Orem, William H.; Varonka, Matthew S.; Platt, George; Shelton, Jenna L.; Davis, Katherine J.; Hyatt, Robert J.; McIntosh, Jennifer C.; Ashley, Kilian; Ono, Shuhei; Martini, Anna M.; Hackley, Keith C.; Gerlach, Robin; Spangler, Lee; Phillips, Adrienne J.; Barry, Mark; Cunningham, Alfred B.; Fields, Matthew W.Subsurface microbial (biogenic) methane production is an important part of the global carbon cycle that has resulted in natural gas accumulations in many coal beds worldwide. Laboratory studies suggest that complex carbon-containing nutrients (e.g., yeast or algae extract) can stimulate methane production, yet the effectiveness of these nutrients within coal beds is unknown. Here, we use downhole monitoring methods in combination with deuterated water (D2O) and a 200-liter injection of 0.1% yeast extract (YE) to stimulate and isotopically label newly generated methane. A total dissolved gas pressure sensor enabled real time gas measurements (641 days preinjection and for 478 days postinjection). Downhole samples, collected with subsurface environmental samplers, indicate that methane increased 132% above preinjection levels based on isotopic labeling from D2O, 108% based on pressure readings, and 183% based on methane measurements 266 days postinjection. Demonstrating that YE enhances biogenic coalbed methane production in situ using multiple novel measurement methods has immediate implications for other field-scale biogenic methane investigations, including in situ methods to detect and track microbial activities related to the methanogenic turnover of recalcitrant carbon in the subsurface.Item Addressing wellbore integrity and thief zone permeability using microbially-induced calcium carbonate precipitation (MICP): A field demonstration(Elsevier BV, 2020-02) Kirkland, Catherine M.; Thane, Abby; Hiebert, Randy; Hyatt, Robert; Kirksey, Jim; Cunningham, Alfred B.; Gerlach, Robin; Spangler, Lee; Philips, Adrienne J.Microbially-induced calcium carbonate precipitation (MICP) is an emerging biotechnology for wellbore integrity applications including sealing defects in wellbore cement and modifying the permeability of rock formations. The goal of this field demonstration was to characterize a failed waterflood injection well and provide proof of principle that MICP can reduce permeability in the presence of oil using conventional oilfield fluid delivery methods. We compared well logs performed at the time the well was drilled with ultrasonic logs, sonic cement evaluation, and temperature logs conducted after the well failed. Analysis of these logs suggested that, rather than entering the target waterflood formation, injectate was traveling through defects in the well cement to a higher permeability sandstone layer above the target formation. Sporosarcina pasteurii cultures and urea-calcium media were delivered 2290 ft (698 m) below ground surface using a 3.75 gal (14.2 L) slickline dump bailer to promote mineralization in the undesired flow paths. By Day 6 and after 25 inoculum and 49 calcium media injections, the injectivity [gpm/psi] had decreased by approximately 70%. This demonstration shows that 1) common well logs can be used to identify scenarios where MICP can be employed to reduce system permeability, remediate leakage pathways, and improve waterflood efficiency, and 2) MICP can occur in the presence of hydrocarbons.Item The Role of Retardation, Attachment and Detachment Processes during Microbial Coal-Bed Methane Production after Organic Amendment(MDPI, 2020-10) Emmert, Simon; Davis, Katherine; Gerlach, Robin; Class, HolgerMicrobially enhanced coal-bed methane could allow for a more sustainable method of harvesting methane from un-mineable coaldbeds. The model presented here is based on a previously validated batch model; however, this model system is based on upflow reactor columns compared to previous experiments and now includes flow, transport and reactions of amendment as well as intermediate products. The model implements filtration and retardation effects, biofilm decay, and attachment and detachment processes of microbial cells due to shear stress. The model provides additional insights into processes that cannot be easily observed in experiments. This study improves the understanding of complex and strongly interacting processes involved in microbially enhanced coal-bed methane production and provides a powerful tool able to model the entire process of enhancing methane production and transport during microbial stimulation.Item Temperature‐dependent inactivation and catalysis rates of plant‐based ureases for engineered biomineralization(Wiley, 2020-11) Feder, Marnie J.; Akyel, Arda; Morasko, Vincent J.; Gerlach, Robin; Phillips, Adrienne J.Engineered (bio)mineralization uses the enzyme urease to catalyze the hydrolysis of urea to promote carbonate mineral precipitation. The current study investigates the influence of temperature on ureolysis rate and degree of inactivation of plant-sourced ureases over a range of environmentally relevant temperatures. Batch experiments at 30◦C demonstrated that jack bean meal (JBM) has a 1.7 to 56 times higher activity (844 μmol urea hydrolyzed g−1 JBM min−1) than the other tested plant-sourced ureases (soybean, pigeon pea and cottonseed). Hence, ureolysis and enzyme inactivation rates were evaluated for JBM at temperatures between 20◦C and 80◦C. A combined first-order urea hydrolysis and first-order enzyme inactivation model described the inactivation of urease over the investigated range of temperatures. The temperature-dependent rate coefficients (kurea) increased with temperature and ranged from 0.0018 at 20◦C to 0.0249 L g−1 JBM min−1 at 80◦C; JBM urease became ≥50% inactivated in as little as 5.2 minutes at 80◦C and in as long as 2238 minutes at 50◦C. The combined urea hydrolysis kinetics and enzyme inactivation model provides a mathematical relationship useful for the design of biomineralization technologies and can be incorporated into reactive transport modelsItem Innovating carbon-capture biotechnologies through ecosystem-inspired solutions(Elsevier BV, 2021-01) Schweitzer, Hannah; Aalto, Nerea J.; Busch, Wolfgang; Chan, Dennis Tin Chat; Chiesa, Matteo; Elvevoll, Edel O.; Gerlach, Robin; Krause, Kristen; Mocaer, Karel; Moran, James J.; Noel, Joseph P.; Patil, Shalaka Kiran; Schwab, Yannick; Wijffels, René H.; Wulff, Angela; Øvreås, Lise; Bernstein, Hans C.Rising atmospheric carbon concentrations affect global health, the economy, and overall quality of life. We are fast approaching climate tipping points that must be addressed, not only by reducing emissions but also through new innovation and action toward carbon capture for sequestration and utilization (CCSU). In this perspective, we delineate next-generation biotechnologies for CCSU supported by engineering design principles derived from ecological processes inspired by three major biomes (plant-soil, deep biosphere, and marine). These are to interface with existing industrial infrastructure and, in some cases, tap into the carbon sink potential of nature. To develop ecosystem-inspired biotechnology, it is important to identify accessible control points of CO2 and CH4 within a given system as well as value-chain opportunities that drive innovation. In essence, we must supplement natural biogeochemical carbon sinks with new bioengineering solutions.Item Effect of temperature, nitrate concentration, pH and bicarbonate addition on biomass and lipid accumulation in the sporulating green alga PW95(Elsevier BV, 2020-12) Corredor, L.; Barnhart, E.P.; Parker, A.E.; Gerlach, Robin; Fields, Matthew W.The mixed effects of temperature (20 °C, 25 °C and 30 °C), nitrate concentration (0.5 mM and 2.0 mM), pH buffer, and bicarbonate addition (trigger) on biomass growth and lipid accumulation were investigated in the environmental alga PW95 during batch experiments in standardized growth medium. PW95 was isolated from coal-bed methane production water and classified as a Chlamydomonas-like species by morphological characterization and phylogenetic analysis (18S, ITS, rbcL). A factorial experimental design tested the mixed effects on PW95 before and after nitrate depletion to determine a low cost, high efficiency combination of treatments for biomass growth and lipid accumulation. Results showed buffer addition affected growth for most of the treatments and bicarbonate trigger had no statistically significant effect on growth and lipid accumulation. PW95 displayed the highest growth rate and chlorophyll content at 30 °C and 2.0 mM nitrate and there was an inverse relation between biomass accumulation and lipid accumulation at the extremes of nitrate concentration and temperature. The combination of higher temperature (30 °C) and lower nitrate level (0.5 mM) without the use of a buffer or bicarbonate addition resulted in maximal daily biomass accumulation (5.30 × 106 cells/mL), high biofuel potential before and after nitrate depletion (27% and 20%), higher biofuel productivity (16 and 15 mg/L/d, respectively), and desirable fatty acid profiles (saturated and unsaturated C16 and C18 chains). Our results indicate an important interaction between low nitrate levels, temperature, and elevated pH for trade-offs between biomass and lipid production in PW95. This work serves as a model to approach and advance the study of physiological responses of novel microalgae to diverse culture conditions that mimic environmental changes for outdoor biofuel production. The most promising conditions for growth and biofuel production were identified for PW95 and this approach can be implemented for other microalgal production systems.Item Mineralogy of microbially induced calcium carbonate precipitates formed using single cell drop-based microfluidics(2020-10) Zambare, Neerja M.; Naser, Nada Y.; Gerlach, Robin; Chang, Connie B.Microbe-mineral interactions are ubiquitous and can facilitate major biogeochemical reactions that drive dynamic Earth processes such as rock formation. One example is microbially induced calcium carbonate precipitation (MICP) in which microbial activity leads to the formation of calcium carbonate precipitates. A majority of MICP studies have been conducted at the mesoscale but fundamental questions persist regarding the mechanisms of cell encapsulation and mineral polymorphism. Here, we are the first to investigate and characterize precipitates on the microscale formed by MICP starting from single ureolytic E. coli MJK2 cells in 25 µm diameter drops. Mineral precipitation was observed over time and cells surrounded by calcium carbonate precipitates were observed under hydrated conditions. Using Raman microspectroscopy, amorphous calcium carbonate (ACC) was observed first in the drops, followed by vaterite formation. ACC and vaterite remained stable for up to 4 days, possibly due to the presence of organics. The vaterite precipitates exhibited a dense interior structure with a grainy exterior when examined using electron microscopy. Autofluorescence of these precipitates was observed possibly indicating the development of a calcite phase. The developed approach provides an avenue for future investigations surrounding fundamental processes such as precipitate nucleation on bacteria, microbe-mineral interactions, and polymorph transitions.Item Importance of specific substrate utilization by microbes in microbially enhanced coal-bed methane production: A modelling study(2020-07) Emmert, Simon; Class, Holger; Davis, Katherine J.; Gerlach, RobinThis study addresses a major gap in the understanding and control of microbially enhanced coal-bed methane (MECBM) production. A mathematical and conceptual model comprises a food-web that includes two types of bacteria and three types of archaea representing substrate-specific members of the community; the microbial community members are potentially interacting by competing for or being inhibited by substrates or products of other microbial community members. The model was calibrated using data sets from two different experimental setups. The calibrated model effectively predicted the methane concentrations within a 7% range of deviation from the experimental results. The results of additional batch experiments using varied conditions are also reproduced in an attempt to validate the model and to test the hypothesis of amendment-induced stimulation of microbial community members capable of converting coal into substrates available to methane producing microbes. This study significantly enhances the understanding of the complex interactions between microbial activity, substrate-specificity and bio-availability of coal for methane production, and provides the basis for including hydraulic flow and transport processes into future mathematical models important for the design and implementation of more sustainable methods of harvesting methane from un-mineable coalbeds.Item A Microfluidic-Based Investigation of Bacterial Attachment in Ureteral Stents(2020-04) De Grazia, Antonio; LuTheryn, Gareth; Meghdadi, Alireza; Mosayyebi, Ali; Espinosa-Ortiz, Erika J.; Gerlach, Robin; Carugo, DarioObstructions of the ureter lumen can originate from intrinsic or extrinsic factors, such as kidney stones, tumours, or strictures. These can affect the physiological flow of urine from the kidneys to the bladder, potentially causing infection, pain, and kidney failure. To overcome these complications, ureteral stents are often deployed clinically in order to temporarily re-establish urinary flow. Despite their clinical benefits, stents are prone to encrustation and biofilm formation that lead to reduced quality of life for patients; however, the mechanisms underlying the formation of crystalline biofilms in stents are not yet fully understood. In this study, we developed microfluidic-based devices replicating the urodynamic field within different configurations of an occluded and stented ureter. We employed computational fluid dynamic simulations to characterise the flow dynamic field within these models and investigated bacterial attachment (Pseudomonas fluorescens) by means of crystal violet staining and fluorescence microscopy. We identified the presence of hydrodynamic cavities in the vicinity of a ureteric occlusion, which were characterised by low levels of wall shear stress (WSS < 40 mPa), and observed that initiation of bacterial attachment occurred in these specific regions of the stented ureter. Notably, the bacterial coverage area was directly proportional to the number of cavities present in the model. Fluorescence microscopy confirmed that the number density of bacteria was greater within cavities (3 bacteria·mm-2) when compared to side-holes of the stent (1 bacterium·mm-2) or its luminal surface (0.12·bacteria mm-2). These findings informed the design of a novel technological solution against bacterial attachment, which reduces the extent of cavity flow and increases wall shear stress over the stent's surface.