Publications by Colleges and Departments (MSU - Bozeman)
Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/3
Browse
3 results
Search Results
Item Biochar as a Renewable Substitute for Carbon Black in Lithium-Ion Battery Electrodes(American Chemical Society, 2022-09) Kane, Seth; Storer, Aksiin; Xu, Wei; Ryan, Cecily; Stadie, Nicholas P.Lignin-derived biochar was prepared and characterized toward potential applications as a conductive electrode additive and active lithium host material within lithium-ion batteries (LIBs). This biochar was specifically selected for its high electrical conductivity, which is comparable to that of common conductive carbon black standards (e.g., Super P). Owing to its high electrical conductivity, this biochar serves as an effective conductive additive within electrodes comprising graphite as the active material, demonstrating slightly improved cell efficiency and rate capability over those of electrodes using carbon black as the additive. Despite its effectiveness as a conductive additive in LIB anodes, preliminary results show that the biochar developed in this work is not suitable as a direct replacement for carbon black as a conductive additive in LiFePO4 cathodes. This latter insufficiency may be due to differences in particle geometry between biochar and carbon black; further optimization is necessary to permit the application of biochar as a general-purpose conductive additive in LIBs. Nevertheless, these investigations combined with an assessment of greenhouse gas emissions from biochar production show that replacing carbon black with biochar can be an effective method to improve the sustainability of LIBs.Item Biochar as a Renewable Substitute for Carbon Black in Lithium-Ion Battery Electrodes(American Chemical Society, 2022-09) Kane, Seth; Storer, Aksiin; Xu, Wei; Ryan, Cecily; Stadie, Nicholas P.Lignin-derived biochar was prepared and characterized towards potential applications as a conductive electrode additive and active lithium host material within lithium-ion batteries (LIBs). This biochar was specifically selected for its high electrical conductivity, which is comparable to that of common conductive carbon black standards (e.g., Super P). Owing to its high electrical conductivity, this biochar serves as an effective conductive additive within electrodes comprised of graphite as the active material, demonstrating slightly improved cell efficiency and rate capability over electrodes using carbon black as the additive. Despite its effectiveness as a conductive additive in LIB anodes, preliminary results show that the biochar developed in this work is not suitable as a direct replacement for carbon black as a conductive additive in LiFePO4 (LFP) cathodes. This latter insufficiency may be due to differences in particle 2 geometry between biochar and carbon black; further optimization is necessary to permit the application of biochar as a general-purpose conductive additive in LIBs. Nevertheless, these investigations combined with an assessment of greenhouse gas emissions from biochar production show that replacing carbon black with biochar can be an effective method to improve the sustainability of LIBs.Item Physical and chemical mechanisms that influence the electrical conductivity of lignin-derived biochar(2021-10) Kane, Seth; Ulrich, Rachel; Harrington, Abigail; Stadie, Nicholas P.; Ryan, Cecily A.Lignin-derived biochar is a promising, sustainable alternative to petroleum-based carbon powders (e.g., carbon black) for polymer composite and energy storage applications. Prior studies of these biochars demonstrate that high electrical conductivity and good capacitive behavior are achievable. However, these studies also show high variability in electrical conductivity between biochars (– S/cm). The underlying mechanisms that lead to desirable electrical properties in these lignin-derived biochars are poorly understood. In this work, we examine the causes of the variation in conductivity of lignin-derived biochar to optimize the electrical conductivity of lignin-derived biochars. To this end, we produced biochar from three different lignins, a whole biomass source (wheat stem), and cellulose at two pyrolysis temperatures (900 °C, 1100 °C). These biochars have a similar range of conductivities (0.002 to 18.51 S/cm) to what has been reported in the literature. Results from examining the relationship between chemical and physical biochar properties and electrical conductivity indicate that decreases in oxygen content and changes in particle size are associated with increases in electrical conductivity. Importantly, high variation in electrical conductivity is seen between biochars produced from lignins isolated with similar processes, demonstrating the importance of the lignin’s properties on biochar electrical conductivity. These findings indicate how lignin composition and processing may be further selected and optimized to target specific applications of lignin-derived biochars.