College of Letters & Science

Permanent URI for this communityhttps://scholarworks.montana.edu/handle/1/37

The College of Letters and Science, the largest center for learning, teaching and research at Montana State University, offers students an excellent liberal arts and sciences education in nearly 50 majors, 25 minors and over 25 graduate degrees within the four areas of the humanities, natural sciences, mathematics and social sciences.

Browse

Search Results

Now showing 1 - 10 of 150
  • Thumbnail Image
    Item
    Dielectric, NMR and X-ray diffraction study of Cs1-x(NH4)xH2PO4
    (1998) Meschia, S. C.; Lanceros-Mendez, S.; Zidansek, Aleksander; Schmidt, V. Hugo; Larson, R.
    Mixed crystals Cs1−x(NH4)xH2PO4 of the ferroelectric CsH2PO4 (CDP) and the antiferroelectric (NH4)H2PO4 were grown with x=0.2 (CADP0.2) in solution. The structural properties of the crystal were analyzed by means of x-ray diffraction. Dielectric measurements at several temperatures and frequencies have been performed along the three crystallographic axes in this sample and also in the fully deuterated CADP0.2 sample (DCADP0.2). NMR experiments were also performed.
  • Thumbnail Image
    Item
    Phase coexistence in proton glass
    (1998) Schmidt, V. Hugo
    Phase coexistence results from quenched structural randomness and frustrated interactions. The nature of this randomness and the frustrated interactions in proton glass are explained. The six types of ordered domains and corresponding ferroelectric and antiferroelectric phases are described, as well as the disordered paraelectric and proton glass phases. Experimental evidence for phase coexistence is presented. Parameters are introduced which describe the volume fractions of phases, and the overall amount of coexistence. This last parameter provides the basis for locating the nominal phase boundaries, and for an expression which describes the sharpness of any of the five smeared-out phase transitions which occur in proton glass crystals.
  • Thumbnail Image
    Item
    Optical properties of RbTiOAsO4 single crystal
    (1998) Tu, Chi-Shun; Yeh, Y.-L.; Katiyar, R. S.; Guo, Ruqian; Schmidt, V. Hugo; Chien, R.-M.; Guo, Ruyan; Bhalla, A.S.
    Rubidium titanyl arsenate (RbTiOAsO4) belongs to the family of nonlinear optical crystals with the general formula M1+TiOX5+O4, where M = K, Rb, Tl, Cs and X = P, As. [1–6] The high damage threshold and broad angular acceptance have made such crystals attractive materials for frequency doubling of Nd-based lasers at λ=1.064 and 1.32 µm, and for optical parametric oscillators (OPO). In addition, the ion exchange properties also make them one of the best candidates for waveguide applications. Potassium titanyl phosphate, KTiOPO4 (KTP), is the most popular among such materials and has been used successfully in different applications. However, the orthophosphate absorption at ∼4.3 and ∼3.5 µm in KTP severely limits the oscillator output power. In contrast, RTA has a broad infrared transparency (∼0.35-5.3 µm) and exhibits no overtone absorption between 3 and 5 µm. [4] This makes the RTA crystal a potential candidate for nonlinear optical applications. At room temperature, KTP-type crystals have an orthorhombic structure with non- centrosymmetric point group C2v (mm2) and space group Pna2 (Z=8). The crystal framework is a three-dimensional structure made from corner-linked TiO6 octahedra and PO4 tetrahedra. Four oxygen ions of the TiO6 belong to PO4 tetrahedral groups which link the TiO6 groups. In our earlier Raman results, a slight softening was exhibited by several LO and TO vibrational modes of RTA. [1,2] However, there is no typical soft mode observed in the lowfrequency modes of the Raman spectra. This motivated usto carryoutBrillouinscatteringmeasurements tolook for softening in the acoustic modes. We report here both the temperature-dependent acoustic phonon spectra and wavelength- dependent refractive indices. The Cauchy equations [n(λ) = A + B/λ2 + C/λ4] of nx, ny and nz are obtained. In particular, the first direct evidence for acoustic phonon soft mode is presented.
  • Thumbnail Image
    Item
    Dynamic first-principles molecular-scale model for solid oxide fuel cells
    (2008) Schmidt, V. Hugo
    This model for voltage V vs. current density i characteristics applies both to the Solid Oxide Fuel Cell (SOFC) and Solid Oxide Electrolysis Cell (SOEC) modes of operation. It is based on reaction rates calculated from a molecular-scale model for the physical and chemical processes involved. An expression is obtained for i as a function of activation polarization Vact at either interface. For large applied positive or negative voltage it correctly predicts i to be based respectively on the reverse reaction or forward reaction attempt rate. In contrast, the Butler-Volmer i(Vact) expression incorrectly predicts infinite i for infinite applied voltage. The model expression for V(i) takes open- circuit emf, activation polarization, concentration polarization, and ohmic polarization into account. Its predictions agree quite well with experiment results obtained by another group.
  • Thumbnail Image
    Item
    Origin of low-frequency dielectric permittivity in BiFeO3 multiferroic ceramics
    (2011) Tu, Chi-Shun; Wang, T.-H.; Schmidt, V. Hugo; Chien, R. R.
    A one-dimensional conductivity barrier model is introduced to describe the dielectric response and conductivity of BiFeO 3 (BFO) and (Bi 0.95 Nd 0.05 )FeO 3 (BFO-5%Nd) ceramics as functions of temperature and frequency. Good qualitative fits of conductivity and dielectric permittivity in the intermediate-temperature region (500-800 K) are obtained with intrinsic barriers of B=8700 K (for BFO) and B=8400 K (for BFO-5%Nd), and extrinsic barriers of Δ=2500 K (for BFO and BFO-5%Nd). The phase-shifted conductivity is responsible for a step-like dielectric relaxation in the region of 500-800 K. The experimental conductivity departs from the conductivity-barrier-model fit below 650 K. This deviation is likely caused by the magneto-electric coupling near the antiferromagnetic-paramagnetic transition. This work suggests that the 5% mole Nd-substitution can stabilize the perovskite structure in BFO ceramic.
  • Thumbnail Image
    Item
    Raman vibrations and photovoltaic conversion in rare earth doped (Bi 0.93 RE 0.07 )FeO 3 (RE=Dy, Gd, Eu, Sm) ceramics
    (2016-01) Chang, L.-Y.; Tu, Chi-Shun; Chen, Pin-Yi; Chen, Cheng-Sao; Schmidt, V. Hugo; Wei, H.-H.; Huang, D.-J.; Chan, T.-S.
    High-resolution Raman spectra, X-ray diffraction, oxygen vacancies, synchrotron X-ray absorption spectroscopy, magnetization, optical band gap, and photovoltaic (PV) conversion have been studied in BiFeO3 (BFO) and (Bi0.93RE0.07)FeO3 (RE=Dy, Gd, Eu and Sm) multiferroic ceramics (7%Dy–BFO, 7%Gd–BFO, 7%Eu–BFO, and 7%Sm–BFO). 7%Dy–BFO exhibits a weak ferromagnetic behavior instead of the linear antiferromagnetic responses found in the other compounds. Optical transmissions reveal band gaps of 2.20–2.21 eV, which are slightly smaller than 2.24 eV in pure BFO. The current vs. voltage (I–V) characteristic curves of indium tin oxide (ITO)/(Bi0.93RE0.07)FeO3 ceramics/Au heterostructures suggest a p–n-junction-like behavior. The maximal PV power-conversion efficiencies under illumination of λ=405 nm in ITO/7%Dy–BFO/Au, ITO/7%Gd–BFO/Au, ITO/7%Eu–BFO/Au, and ITO/7%Sm–BFO/Au respectively reach 0.22%, 0.35%, 0.27%, and 0.24%, which are much larger than 0.017% in ITO/BFO/Au. The PV open-circuit voltage and short-circuit current can be reasonably described by a junction model as a function of illumination intensity.
  • Thumbnail Image
    Item
    Raman vibrations, domain structures, and photovoltaic effects in A-site La-modified BiFeO 3 multiferroic ceramics
    (2015) Tu, Chi-Shun; Chen, Cheng-Sao; Chen, Pin-Yi; Xu, Zhe-Rui; Idzerda, Yves U.; Schmidt, V. Hugo; Lyu, M.-Q.; Chan, T.-S.; Liu, C.-Y.
    Micro‐Raman spectroscopy, X‐ray diffraction, high‐resolution transmission electron microscopy (TEM), oxygen vacancies, synchrotron X‐ray absorption spectroscopy, magnetizations, optical band gaps, and photovoltaic (PV) effects have been studied in (Bi1−xLax)FeO3 (BFO100xL) ceramics for x = 0.0, 0.05, 0.10, and 0.15. XRD, Raman spectra, and TEM confirm a rhombohedral R3c symmetry with the tilted FeO6 oxygen octahedra in all compounds. The low‐frequency Raman vibrations become broader and shift toward higher frequency as La3+ increases. Fe K‐edge synchrotron X‐ray absorptions reveal that Fe3+ valence and Fe–O–Fe bond angle are not modified by the La3+ substitution. All compounds exhibit a linear antiferromagnetic feature. Optical transmission reveals band gaps in the range of 2.22–2.24 eV. The heterostructures of indium tin oxide (ITO) film/(Bi1−xLax)FeO3 ceramics/Au film show a p–n junction‐like I–V characteristic behavior. The maximal PV power conversion efficiency can reach 0.19% in ITO/BFO15L/Au under illumination of λ = 405 nm. A junction‐like theoretical model can reasonably describe open‐circuit voltage and short‐circuit current as a function of illumination intensity.
  • Thumbnail Image
    Item
    A-site strontium doping effects on structure, magnetic, and photovoltaic properties of (Bi 1-x Sr x )FeO 3-δ multiferroic ceramics
    (2015) Tu, Chi-Shun; Xu, Zhe-Rui; Schmidt, V. Hugo; Chan, T.-S.; Chien, R. R.; Son, H.
    Raman spectroscopy, X-ray diffraction (XRD), magnetization hysteresis loop, synchrotron X-ray absorption spectroscopy, and photovoltaic effects have been measured in (Bi1−xSrx)FeO3−δ (BFO100xSr) ceramics for x=0.0, 0.05, 0.10, and 0.15. Raman spectra and XRD reveal a rhombohedral R3c structure in all compounds. A-site Sr2+ doping increases fluctuations in cation-site occupancy and causes broadening in Raman modes. BFO15Sr exhibits a strong ferromagnetic feature due to reduction of FeOFe bond angle evidenced by the extended synchrotron X-ray absorption fine structure. The heterostructure of indium tin oxide (ITO) film/(Bi1−xSrx)FeO3−δ ceramic/Au film exhibit clear photovoltaic (PV) responses under blue illumination of λ=405 nm. The maximal power-conversion efficiency and external quantum efficiency in ITO/BFO5Sr/Au are about 0.004% and 0.2%, respectively. A model based on optically excited charges in the depletion region between ITO and (Bi1−xSrx)FeO3−δ can well describe open-circuit voltage and short-circuit current as a function of illumination intensity.
  • Thumbnail Image
    Item
    Structural stability and depolarization of manganese-doped (Bi 0.5 Na 0.5 ) 1-x Ba x TiO 3 relaxor ferroelectrics
    (2014-10) Wang, S.-F.; Tu, Chi-Shun; Chang, T.-L.; Chen, Pin-Yi; Chen, Cheng-Sao; Schmidt, V. Hugo; Anthoniappen, J.
    This work reveals that 0.5 mol. % manganese (Mn) doping in (Bi0.5Na0.5)1−xBaxTiO3 (x = 0 and 0.075) solid solutions can increase structural thermal stability, depolarization temperature (Td), piezoelectric coefficient (d33), and electromechanical coupling factor (kt). High-resolution X-ray diffraction and transmission electron microscopy reveal coexistence of rhombohedral (R) R3c and tetragonal (T) P4bm phases in (Bi0.5Na0.5)0.925Ba0.075TiO3 (BN7.5BT) and 0.5 mol. % Mn-doped BN7.5BT (BN7.5BT-0.5Mn). (Bi0.5Na0.5)TiO3 (BNT) and BN7.5BT show an R − R + T phase transition, which does not occur in 0.5 mol. % Mn-doped BNT (BNT-0.5Mn) and BN7.5BT-0.5Mn. Dielectric permittivity (ε′) follows the Curie-Weiss equation, ε′ = C/(T − To), above the Burns temperature (TB), below which polar nanoregions begin to develop. The direct piezoelectric coefficient (d33) and electromechanical coupling factor (kt) of BN7.5BT-0.5Mn reach 190 pC/N and 47%.
  • Thumbnail Image
    Item
    Structural and dielectric properties of (Bi 1-x Ba x )(Fe 1-x Ti x )O 3 multiferroic ceramics
    (2014) Wang, T.-H.; Tu, Chi-Shun; Schmidt, V. Hugo; Chien, R. R.; Ding, Y.
    Phase transitions, dielectric permittivity, and conductivity of (Bi1-xBax)(Fe1-xTix)O3 (x = 0.05 and 0.1) [BFO-(Ba,Ti)] multiferroic ceramics have been studied as functions of temperature and frequency. In situ synchrotron x-ray diffraction revealed rhombohedral–cubic transitions in the temperature ranges 760–780°C in BFO-5%(Ba,Ti), and 720–750°C in BFO-10%(Ba,Ti). A one-dimensional barrier model with intrinsic barriers B every lattice constant a and extrinsic barriers B + Δ is introduced to describe the dielectric response and conductivity. This work revealed that (Ba,Ti) substitutions can enhance the intrinsic barriers and reduce the hopping rate of charge carriers, thereby giving the desired effect of decreasing the conductivity.
Copyright (c) 2002-2022, LYRASIS. All rights reserved.