Photo-induced electric responses in heterostructure of indium tin oxide/(Bi 1-x Ca x FeO 3-δ /Au,
Date
2014
Journal Title
Journal ISSN
Volume Title
Publisher
Abstract
Photovoltaic effects in heterostructure of indium tin oxide (ITO)/(Bi 1_x Ca x )FeO 3_δ multiferroic ceramics/Au (x = 0.0 and 0.15) have been measured under illuminations of λ = 405 and 445 nm. Open-circuit voltage (Voc), short-circuit current density (Jsc), and power conversion efficiency (η) show strong dependences on light wavelength and intensity. For λ = 405 nm, V oc and J sc can reach 0.62 V and 0.042 A/m 2 for BiFeO 3 (BFO), and 0.48 V and 0.30 A/m 2 for (Bi 0.85 Ca 0.15 )FeO 2.925 (BFO-15%Ca) at I N 9.1×10 2 W/m 2 . The maximum power conversion efficiency for λ = 405 nm can reach η N 0.002% for BFO and η N 0.0035% for BFO-15%Ca, which are comparable with 0.0025% observed in graphene/polycrystalline BFO/Pt films. A model based on forward p-n junction, reverse p-n junction and photo-excited currents in the interface between ITO film and (Bi 1_x Ca x )FeO 3_δ ceramic, was developed to describe Voc and Jsc as a function of incident light intensity. The theoretical fits agree well with experimental results. The depletion-region widths for λ = 405 nm were calculated as a function of light intensity. The calculated depletion-region widths without illumination are do N 210 nm in BFO and do N 340 nm in BFO-15%Ca.
Description
Keywords
Citation
C.-M. Hung, C.-S. Tu, Z.-R. Xu, V.H. Schmidt, and R.R. Chien, “Photo-induced electric responses in heterostructure of indium tin oxide/(Bi 1-x Ca x FeO 3-δ /Au,” IEEE Transactions on Magnetics 50, 1001804 (2014). doi: 10.1109/TMAG.2014.2327663.
Collections
Endorsement
Review
Supplemented By
Referenced By
Creative Commons license
Except where otherwised noted, this item's license is described as This Item is protected by copyright and/or related rights. You are free to use this Item in any way that is permitted by the copyright and related rights legislation that applies to your use. For other uses you need to obtain permission from the rights-holder(s).